Maher K. Tadros, Ph.D., P.E. - Extended CV
spacer
         
 
spacer
Home
Biography
Short CV
Extended CV
Patents
Honors & Awards
Peer Testimonials
Publications
Contributions
Academics
* Courses Taught
* Research Projects
* Doctorate/Master's Degree Students
Articles
Multimedia
Contact
spacer
 

PUBLICATIONS

Books

Principal Author, PCI Bridge Design Manual. I consider this to be my most accomplished contribution to the engineering practice of bridge design.  This manual is considered to be the most authoritative book on precast prestressed concrete bridges. It is the first of its kind. I coordinated to work of 25 other distinguished experts who co-authored parts of the Manual. Phase I was released in 1997. Phase II has been released in stages since the spring of 1999, and continuing through the spring of 2003.

Principal Refereed Publications
  1. Tadros, Maher, Hanna, Kromel, and Hill Chris, “I-Girder Bearing Design for Improved Stability,” Presented at the PCI/FHWA National Concrete Bridge Conference and submitted for publication in the PCI Journal, Oct 2008.
  2. Tadros, Maher, Fawzy, Faten, and Purisudh, Prasan, “The Dilemma of Prestressed Girder Camber Variability,” Presented at the PCI/FHWA National Concrete Bridge Conference and submitted for publication in the PCI Journal, Oct 2008.
  3. Hanna, K., Morcous, G., Tadros, M. “Transverse Post-Tensioning Design and Detailing of Precast Prestressed Adjacent Box Beam Bridges”, Submitted to PCI Journal, November 2007.
  4. Hanna, K., Kleymenn, M., Morcous, G., Tadros, M. “Effect of Class C Fly Ash on Controlling Alkali Silica Reaction in Concrete Pavement”, Re-Submitted to ACI Materials Journal, June 2008
  5. Hanna, K., Morcous, G., Tadros, M. (2007) “Transverse Design and Detailing of Adjacent Box Beam Bridges”, PCI-FHWA National Bridge Conference, Phoenix, AZ, October.
  6. Morcous, G., and Tadros, M. (2007) “Welded Wire Reinforcement versus Random Steel Fibers in Ultra-High Performance Prestressed Concrete Girders” International Workshop on Advanced Structures and Materials (IWASAM), University of Nebraska and Kansai University, Lincoln, NE, November.
  7. Hanna, K., Morcous, G., and Tadros, M. (2008) “Standardized Precast Prestressed Concrete Panels for Bridge Decks”, 2008 Concrete Bridge Conference, PCA, St. Louis, MO, May.
  8. Amorn, Wilast, Tuan, Christopher, and Tadros, Maher "Curved Precast Concrete I-Girder Bridges," accepted for publication in the PCI Journal, November/December, 2008.
  9. Maximos, Hany, Tadros, Maher and Erdogmus Ece, "Fatigue Evaluation for Reinforced Concrete Box Culverts" submitted for publication in the ACI Structural Journal, 2008.
  10. Erdogmus, Ece, Skourup, Brian, and Tadros, Maher, “Recommendations for Design of Reinforced Concrete Pipe" ASCE Journal Paper, 2008, in review.
  11. Holombo, Jay, Trinh, Vinh and Tadros, Maher K., “Sustainable Concrete Bridge Design,” Aspire Magazine, Summer 2008, pp. 14-15.
  12. Badie et al., “Extending Spacing of Shear Stud Clusters to 48 inches for Steel Bridge Girders, Part I: Background and Push-off Specimens,” PCI Journal, in review.
  13. Badie et al., “Extending Spacing of Shear Stud Clusters to 48 inches for Steel Bridge Girders, Part II: Full-Scale Beam Testing & Recommendations,” PCI Journal, in review.
  14. Badie, S.S., Girgis, A., Nguyen, N., and Tadros, M.K., “Bigger is Better: Development of the 31.8-mm Diameter Shear Stud for Steel Bridges in USA,” CEB-FIP, 2nd Symposium on Connections between Steel and Concrete, Stuttgart, Germany, September 4-7, 2007, pp 1437-1447
  15. Badie, S.S., and Tadros, M.K., “Full-Depth, Precast-Concrete Bridge Deck Panel Systems,” National Cooperative Highway Research Program, NCHRP Report 584, Transportation Research Board, Washington, D.C., (2008).
  16. Badie, S. S., Girgis, A., Nguyen, N., and Tadros, M. K., “Development and Application of Large-size Shear Studs to Steel Girder Bridges,” AISC (American Institute of Steel Construction), Engineering Journal, Second Quarter, 2007, V. 44, No 2, 2007, pp 79-90.
  17. Sun, Hennessey, Tadros, Ahlman, “Arbor Road Bridge- A Curved concrete girder bridge Value Engineering from a curved steel plate girder,” PCI Journal, Vol. 52, No. 2, March/April 2007, pp. 94-107.
  18. Erdogmus, Ece, Tadros, Maher K., and Skourup, Brian, “History of Bedding Factor and Recommendations for Design of Reinforced Concrete Pipe,” TRB 2007 Annual meeting and Transportation Research Record, Washington, D.C. January (21-24), 2007. in print.
  19. Erdogmus, Ece, Skourup, Brian, Maximos, Hany, and Tadros Maher K., "Behavior and Design of Buried Concrete Pipes - Phase II"  A presentation to the ACPA Technical Committee Meeting at the TRB Conference, Washington, D.C., January (21-24), 2007.
  20. Seguirant, Steve, Kleymann, Matt, Girgis, Amgad, Tadros, Maher, “Minimum Reinforcement in Flexural Members,” PCI Journal, V. 52, No. 1, January/February 2007, pp. 145-148.
  21. Badie, Sameh, Girgis, Amgad, Tadros, Maher, “Full Depth Precast Concrete Bridge Deck Panel System, Notional Cooperative Highway Research Program, NCHRP 12-65 Project Fianl report, National Research Council, Washington DC, Nov. 2006, 156 pp.
  22. Amorn, Wilast, Bowers, Jeremy, Girgis, Amgad, and Tadros, Maher K., “Fatigue of Deformed Welded Wire Reinforcement,” PCI JOURNAL, V. 52, No. 1, January/February 2007, pp. 106-120.
  23. Jaber, Fouad, Fallaha, Sam, Girgis, Amgad, Tadros, Maher K.,”Nebraska Precast Record: 204th Street Bridge Spans Single Point Interchange,” PCI Journal V. 51, No. 6, Nov.-Dec. 2006, pp. 48-54.
  24. Kleymann, Matt, Girgis, Amgad, Tadros, Maher, “Minimum Reinforcement in Flexural Members,” PCI Journal, V. 51, No. 5, September-October 2006, pp. 146-148.
  25. Sun, Hennessey, Tadros,  “Value Engineering Arbor Road Bridge Using the Curved Precast Concrete U-Girders, 2005 NBC
  26. Jaber, F.,  Fallaha, S.,  Girgis, A.,  Tadros, M. K.,  Sun, C., and  Hennessey, S.,  ”Nebraska Precast Record: Sky-Line Single Span Bridge Overpasses Single Point Interchange,” accepted for publication PCI Journal, 2006
  27. Badie, S. S., Girgis, A., Nguyen, N., and Tadros, M. K., “Utilization of large-size studs with precast concrete deck panels,” Proceeding of the PCI/NATIONAL BRIDGE CONFERENCE 2006.
  28. Girgis, A., Badie, S. S., Chaunbing, S., Sriboonma, K. and Tadros, M. K., “Utilization of Full-depth precast concrete bridge deck panels in USA,” The Second fib Congress, 5-8 June, 2006, Naples, Italy.
  29. Tadros, M.K., “Proper Detailing of Precast/Prestressed Concrete Girders,” PCI JOURNAL, Vol. 50, No. 5, September/October 2005, pp. 110-111.
  30. Tadros, M.K., “Proper Detailing of Precast/Prestressed Concrete Girders,” PCI JOURNAL, Vol. 50, No. 6, November/December 2005, pp. 118-119.
  31. Tadros, M. K., Al-Omaishi, N, Seguirant, S.J., and Gallt J.G., “Prestress Losses in Pretensioned High-Strength Concrete Bridge Girders,” Accepted for publication in two parts (Material Properties, Structural Design), PCI JOURNAL, accepted for publication, September/October and November/Decemebr 2006.
  32. Girgis, A., and Tadros, M., “Optimization of Spliced Girder Bridges Through Vertical Splicing” PCI JOURNAL, Scheduled for publication Vol 50, No. 4, July-August 2005.
  33. Holmes, W., Kusolthamarat, David & Tadros, M.K., “NU Precast Concrete House Provides Spacious and Energy Efficient Solution for Residential Construction,” PCI JOURNAL, Scheduled for publication Vol 50, No. 3, May-June 2005.
  34. Berryman, Charles, Zhu Jingyi, Jensen, Wayne, and Tadros, Maher K., “High-percentage  replacement of cement with fly ash for reinforced concrete pipe,” Cement and Concrete Research, Article #3031, Pergamon, Elsevier Ltd, 2004, 4 pp.
  35. Tadros, M. K., Industry Titans, Journal Coverage, PCI JOURNAL, Vol 49, No. 6, Nov. Dec. 2004, pp.13, 35-47.
  36. Fallaha, S., Sun, C., Lafferty, M. and Tadros, M.K., “High Performance Precast Concrete NUDECK  Panel System for Nebraska’s Skyline Bridge,” PCI JOURNAL, Vol 49, No. 5, September-October 2004, pp. 40-51.
  37. Tadros, Maher K., Russell, Henry G., “effect of High Strength Concrete on Prestrssed Concrete Girders,” Open Forum, PCI JOURNAL, Vol 49, No. 4, July-August 2004, pp. 144-145.
  38. Badie, S. S., Tadros, M.K., Kakish, H.F., Kamel, M.R., and Baishya, “Rapid Deck Replacement,” Concrete International, American Concrete Institute, Vol. 26, No. 7, July 2004, pp. 72-79.
  39. Tuan, C., Yehia, S., Jongpitakseel, N., and Tadros, M., “End Zone Reinforcement for Pretensioned Concrete Girders,” PCI Journal, Vol. 49, No. 3, May-June 2004, pp. 68-82.
  40. Girgis, A., Hennessey, S., Drews, D., & Tadros, M. K., “Value Engineering of a Spliced Girder Bridge Produces Pretensioned Concrete Records,” Concrete Bridge Conference, Charlotte, North Carolina, May 2004.
  41. Ma, J., Tadros, M.K. and Sun, C., “Prestressed Concrete Box Girders Made from Precast Unsymmetrical Sections,” PCI Journal, Vol. 49, No. 1, January-February 2004, pp
  42. Tadros M., and Badie S., ”Efficient Deck/Girder Connections for Rapid Deck Replacement,” Emirates Journal for Engineering Research, Vol. 9, No. 2, 2004, pp. 1-5.
  43. Sun C., Tadros M., and Fallaha S., “Full-depth Precast/Prestressed Concrete Bridge Deck Panel System,” Emirates Journal for Engineering Research, Vol. 9, No. 2, 2004, pp. 7-12.
  44. Tadros M. K., and Sun, C.  "Implementation of the Superstructure/Substructure Joint Details", Final Report, Nebraska Department of Roads (NDOR), Project No. SPR-PL-1(038) P514, December 2003.
  45. Tadros, M. K., discussion of the report “PCI Standard Design Practice,” Prepared by PCI Committee on Building Code, PCI JOURNAL, Vol. 48, No. 1, January/February 2003, pp. 14-30, Discussion, PCI JOURNAL, Vol. 48, No. 6, Nov./Dec. 2003, pp. 130-132.
  46. Girgis, A., and Tadros, M., “Vertically Segmented Precast Concrete I-Girder,” High Performance Concrete Symposium and Bridge Conference, 49th PCI Annual Convention and Exhibition, Orlando, Florida, October 2003.
  47. Girgis, A., Tadros, M., & Fallaha, S., “Effectiveness of I-Girder Splicing Alternatives,” High Performance Concrete Symposium and Bridge Conference, 49th PCI Annual Convention and Exhibition, Orlando, Florida, October 2003.
  48. Sun, C., Girgis, A., & Tadros, M., “Structural Behavior of Flexural Member with High Strength Concrete,” High Performance Concrete Symposium and Bridge Conference, 49th PCI Annual Convention and Exhibition, Orlando, Florida, October 2003.
  49. Zokaie, T., Girgis, A., Pearce, R., and Tadros, M.K., “New Loss Estimation for Design of Post-tensioned Spliced Girder Bridges,” Proceedings of the Western Bridge Engineers’ Bi-Annual Conference, Sparks/ Reno, NV, October 2003.
  50. Noppakunwijai, P., Tadros M. K., and Sun, C.  “Application of the Strength Design Method for Flexural Members at Prestress Transfer, PCI Journal, Vol. 48, no. 5, September-October 2003, pp 62-74.
  51. Noppakunwijai, P., Tadros, M. K., Krause G. “Elimination of Prestressed Concrete Compression Limits at Service Load,” Discussion by Goodyear, D., Taylor, P., Jennings, P., Smith, E., Erskine, F.,  Baxter, T., Schupack, M., Owen, M., and Fallaha, S., PCI JOURNAL, Vol. 48, No. 3, May/June  2003, pp.96-103.
  52. Tadros, M. K., discussion of the report “PCI Standard Design Practice,” Prepared by PCI Committee on Building Code, PCI JOURNAL, Vol. 48, No. 1, January/February 2003, pp. 14-30, Discussion, PCI JOURNAL, Vol. 48, No., pp.
  53. Tadros, M.K. Girgis, A., and Saleh, M. “Extending Spans,” Chapter 11, PCI Bridge Design Manual, PCI, Chicago, IL, 2003, 90 pp.
  54. Tadros, M. K., Al-Omaishi, N, Seguirant, S.J., and Gallt J.G., “Prestress Losses in Pretensioned High-Strength Concrete Bridge Girders,” NCHRP Report 496, National Cooperative Highway Research Program, Transportation Research Board, The National Academies, Washington, D.C., 2003.
  55. Ma, Zhongguo (John) and Tadros, Maher K., “Prestressed Concrete Box Girders Made From Precast Z-Sections,” Submitted for Publication, Journal of Structural Engineering, ASCE.
  56. Tadros, M.K., Badie, Girgis, A., “Innovative Interface Systems for Steel Girder/Concrete Deck Connection,” Accepted for publication, Proceedings of the International Conference on Innovative Composite Action, FEB, Stuttgart, Germany, 2002.
  57. Noppakunwijai, P., Tadros, M. K., Krause G. “Elimination of Prestressed Concrete Compression Limits at Service Load,” PCI JOURNAL, Vol. 47, No. 6, Nov. /Dec. 2002, pp.48-65.
  58. Foster, E. T., Yehia, S.A., and Tadros, M.K., “A Precast Post-Tensioned Segmental Pole,” Proceedings, Electrical Transmission in a New Age, Omaha, NE, Structural Engineering Institute, American Society of Civil Engineers, New York, NY,  September 2002, pp.318-324.
  59. Noppakunwijai, P., Tadros, M. K., Ma, Z.   “Pullout Capacity of Non-Prestressed Strands for Prestressed Concrete Girders,” PCI JOURNAL, Vol. 47, No. 4, July/August 2002, pp. 90-103.
  60. Hennessey, S., Bexten, K. and Tadros, M.K., “Value Engineering Results in Successful Precast Railroad Bridge Solution,” PCI JOURNAL, Vol. 47, No. 4, July/August 2002, pp. 72-77.
  61. Girgis, A., Sun, C., and Tadros, M.K., “Problems and Solutions-Flexural Strength of Continuous Bridge Girders-Avoiding the Penalty in the AASHTO LRFD Specifications,” PCI JOURNAL, Vol. 47, No. 4, July/August 2002, pp. 138-141.
  62. Noppakunwijai, P., Jongpitakseel, N., Ma, Z., Yehia, S., and Tadros, M., “Pullout Capacity of Non-Prestressed Bent Strands for Prestressed Concrete Girders,” PCI Journal Vol.47 No.4 July/August, 2002.
  63. Tadros, M.K., Badie, S.S., and Kamel, M., “Girder/Deck Connection for Rapid Removal of Bridge Decks,”   PCI JOURNAL, Vol. 47, No. 3, May/June 2002, pp. 58-69.
  64. Badie, S. S., Tadros, M.K. Baishya, M., Kakish, H. “Large Studs for Composite Action in Steel Bridge Girders,” American Society of Civil Engineering (ASCE), Bridge Journal, May/June 2002, Vol. 7, No. 3, pp. 195-203.
  65. Badie, S.S., and Tadros, M.K., “A New Debonded Shear Key System for Composite Concrete Bridge Girders,” ASCE Congress on Performance of Structures from Research to Design, Denver, CO, April 2002, pp.353-354.
  66. Tadros, M.K., Yehia, S. and Foster, T., “Utilization of Coal Ash in Concrete Products Used by OPPD,” Final Report, Omaha, Public Power District, February 2002, 85 pp.
  67. Noppakunwijai, P., Tadros, M. K., Ma, Z., Mast, R. and Seguirant, S. “Strength Design of Pretensioned Flexural Concrete Members at Prestress Transfer,” PCI JOURNAL, Vol. 47, No. 1, Jan./Feb 2002, pp. 106-109.
  68. Tadros, M.K. et al, ACI Committee 318-G, “Discussion and Closure of ACI 318-02,” Concrete International, American Concrete Institute, Vol. 24, No.1, pp. 89-147.
  69. Huo, Sharon, Tadros, M.K., Al-Omaishi, N., “Creep Shrinkage, and Modulus of Elasticity of High Performance Concrete,” Materials Journal, American Concrete Institute, Vol. 89, No. 6, Nov./Dec. 2001, pp 429-439.
  70. Saleh, M., and Tadros, M.K., “Effects of Post-Tensioning on Concrete Members,” PCI JOURNAL, Vol. 46, No. 5, September/October 2001, pp. 104-109.
  71. Tadros, M. K., Badie, S. S. and Girgis, A. M. "Innovative Interface Systems for Steel-Girder/Concrete-Deck Connection," Proceeding of the International Symposium on  Connections Between Steel and Concrete, 55th Rilem Annual Meeting, Stuttgart, Germany, September 9th – 12th, 2001, pp.1172-1181.
  72. Tadros, M.K., and Puckett, Jay, “Design for Shear in Prestressed Concrete Bridge Members,” PCI JOURNAL, Vol. 46, No.3, May-June 2001, pp.90-92.
  73. Badie, S. S., Tadros, M. K., and Pedersen, K. E., “Re-Examination of I-Girder/Pier Connection In Jointless Bridges,” PCI JOURNAL, Vol. 46, No. 2, March/April 2001, pp. 62-74.
  74. Badie, S. S., Tadros, M.K., and Pedersen, K “Superstructure/Substructure Connection Details for I-Girder Prestressed Concrete Bridges,” PCI Journal, March-April 2001.
  75. Noppakunwijai, P., Tadros, M. K., Ma, Z., Mast, R. “Strength Design of Pretensioned Flexural Concrete Members at Prestress Transfer,” PCI JOURNAL, Vol. 46, No. 1, Jan./Feb 2001, pp. 34 – 52.
  76. Badie, S. S. and Tadros, M. K. "Large Studs for Composite Action in Steel Girders," Proceeding of the First International Structural Engineering and Construction Conference (ISEC-01), Honolulu, Hawaii, January 24-26, 2001.
  77. Tadros, M.K. et al, “State-of-the Art- Report on Partially Prestressed Concrete,” prepared with other ACI 423 Committee members, ACI 423.5R-99, 2001, 37 pp.
  78. Tadros, Maher K, and Badie, Sameh S, “I-Girder/Deck Connection for Efficient Deck replacement,” Final Report, Center for Infrastructure Research, NDOR Project No. SPR-PL-1 (035) P516, December 2000, 118pp.
  79. Tadros, M.K., “Innovative Bridge Systems in Nebraska,” Nebraska Cooperative Research Conference, October 12, 2000, Lincoln, NE, 20 pp.
  80. Al-Omaishi, N., and Tadros, M.K., “Composite Action of Flexural Members Made with High Strength Concrete,” PCI/FHWA/FIB International Symposium, Orlando, Florida, September 2000, pp. 473-383.
  81. Noppakunwijai, P., and Tadros, M.K., “Strength Design of Pretensioned Flexural members for Prestress Transfer,” PCI/FHWA/FIB International Symposium, Orlando, Florida, September 2000, 585-597.
  82. Badie, S. and Tadros, M.K., “Proposed Equivalent Flexural Stress Block for HSC,” PCI/FHWA/FIB International Symposium, Orlando, Florida, September 2000, 762-774.
  83. Huo, X. (Sharon), and Tadros, Maher K., ”Structural Design of High Performance Concrete Bridge Beams,” Proceedings of the Fifth International Bridge Conference, Transportation Research Board, Tampa, Florida, April 2-4, 2000, Journal of the Transportation Research Board, N. 1692, pp. 171-178.
  84. Tadros, Maher K., and Badie Sameh S., “Latest Development in Precast Bridge Deck Systems,” International Association of Bridge and Structural Engineering Symposium, March 2000, Egypt.
  85. Ma, Z., Tadros, M. K., and Baishya, M.  “Shear Behavior of Pretensioned High Strength Concrete Bridge I-Girders,” ACI Structural Journal, Vol. 97, No. 1, January-February 2000, pp. 185-192.
  86. Ma, Zhongguo, and Tadros, Maher K., “Shear Strength of HPC I-Girders,” The International Conference on High Strength Concrete, Engineering Foundation, 13-18 July 1997, Kona, Hawaii, American Society of Civil Engineers, Reston, Virginia, 1999, pp. 257-269.
  87. Huo, Xiaoming, Tadros, Maher K., ”Time Dependent Effects in Prestressed Concrete Composite Bridge Members,” The International Conference on High Strength Concrete, Engineering Foundation, 13-18 July 1997, Kona, Hawaii, American Society of Civil Engineers, Reston, Virginia, 1999, pp. 308-320.
  88. Saleh, Mohsen, Tadros, Maher K., Einea, Amin, Fischer Larry G., and Foster E. Terence, “Standardized Design of Double Tees with Large Web Openings,” PCI JOURNAL, V. 44, No. 6, Nov.-Dec. 1999, pp. 68-78.
  89. Einea, A., Yehia, S., and Tadros, M.K., “Lap Splices in Confined Concrete,” ACI Structural Journal, Vol. 96, No. 6, Nov.-Dec. 1999, pp. 947-955.
  90. Ma, Z. and Tadros, M.K.  “Simplified Method For Shear Design Based on AASHTO Load and Resistance Factor Design Specifications,” Paper No. 99-0266, Transportation Research Record 1688, Transportation Research Board, Washington, D.C., Nov. 1999, pp. 10-20.
  91. Devalapura, R.K., Krause, G.L., Tadros, M.K., "A Study on the Deflection of Prestressed Masonry Walls," The Masonry Society Journal, Vol. 17, No. 1, November 1999, pp. 21-30.
  92. Kakish, Hussam, Splittgerber, Darin, Baishya, Mantu, Tadros, Maher K., “Large Studs for Composite Action in Steel Bridge Girders, Paper No. 99-1116, Transportation Research Record 1688, Transportation Research Board, Washington, D.C., Nov. 1999, pp. 53-61.
  93. Tadros, M.K., Huo, X., Ma, Z., and Baishya, M. “Structural Design of High Performance Concrete Bridges,” ACI Special Publication 189– High Performance Concrete, American Concrete Institute, October 1999, pp. 9 - 35.
  94. Tadros, Maher K, and Badie, Sameh S, “Superstructure/Substructure Joint Details,” Final Report, Center for Infrastructure Research, NDOR Project No. PR-PL-1 (035) P514, October 1999, 176 pp.
  95. Badie, S. S. and Tadros, M. K., “Flexural strength According to AASHTO LRFD Specifications,” PCI Journal, July-August, Vol. 44, No. 4, 1999, pp. 122-127.
  96. Badie, Sameh S., Baishya, Mantu C and Tadros, Maher K., “Innovative Bridge Panel System a Success,” Concrete International, American Concrete Institute, Vol. 21, No. 6,  June 1999, pp. 51-54.
  97. Ma Z., Tadros, M.K., and Baishya, M., “Shear of High Strength Prestressed Concrete Stemmed Members,” Proceedings of the 5th International Symposium on Utilization of High Strength/High Performance Concrete, Sandefjord, Norway, Norwegian Concrete Association, June 20-24, 1999, pp. 536-547.
  98. Ma, Z., Huo, X., Tadros, M.K., Baishya, M., Wollmann G., and Shamir, E., “Restraint Moments in Prestressed Concrete Continuous Bridges,” PCI JOURNAL, Vol. 44, No. 3, May/June 1999, pp. 84-98, Discussion.
  99. Tadros, M.K. and Dobbs John E. “Formwork Issues Concerning Casting of Precast Concrete Members,” PCI JOURNAL, Vol. 44, No. 2, March /April 1999, pp. 90-91.
  100. Bassi, K. G., Badie, S.S.; Baishya, M.C, and Tadros, M.K. “NUDECK- An Efficient and Economical Precast Bridge Deck System”, PCI Journal, March-April, Vol. 44, No. 2, 1999, pp. 94-95, Discussion.
  101. Ma, Z., Saleh, M., and Tadros, M.K.  “Optimized Post-Tensioning Anchorage in Prestressed Concrete I-Beams,” PCI JOURNAL, Vol. 44, No. 2, March /April 1999, pp. 56-73.
  102. Tadros, Maher K., Baishya, M.C., Rossbach, Philip E., Pietrok, Gary A., “Rapid Replacement of Bridge Decks,” Concrete International, American Concrete Institute, Vol. 21, No. 2, February 1999, pp.
  103. Badie, S. S., Kamel, M. R., and Tadros, M. K., “Precast Pretensioned Trapezoidal Box Beam for Short Span Bridges”, PCI JOURNAL, Vol. 44, No. 1, January/February, 1999, pp. 48-59.
  104. Tadros, M. K., and Baishya, M.C., “Rapid Replacement of Bridge Decks”, National Cooperative Highway Research Program, NCHRP Report # 407, Transportation Research Board, National Academy of Sciences, Washington, D.C., 1998, 52 pp.
  105. Tadros, Maher K., Badie, S.S., and Baishya, M.C., “Experimental Evaluation of the EFFIDECK Bridge Deck System”, Fort Miler Co., Inc., Schuylerville, NY 12871, 121 pp., 1998.
  106. Saleh, Mohsen A., Brady, Pam alee A, Einea, Amin, Tadros, Maher K., “ Design and Performance Testing of Prestressed Precast Reinforced Concrete Double Tee Beams with Web Openings,” Construction Productivity Advancement Research (CPAR) Program, US Army Corps of Engineers, Construction Engineering Research Laboratories, USACERL Report 98/03, 1998, 141 pp.
  107. Saleh, Mohsen A., Brady, Pamalee A, Einea, Amin, Tadros, Maher K., and Decker, Curtis,“ Design and Performance Testing of Prestressed Precast Reinforced Concrete Hybrid Joists,” Construction Productivity Advancement Research (CPAR) Program, US Army Corps of Engineers, Construction Engineering Research Laboratories, USACERL Report 98/04, 1998, 117 pp.
  108. Tadros, Maher K, Einea, Amin, “Application of Optimized Prestressed Concrete I-Girder,” Nebraska Department of Roads, Project # SPR-PL-1 (31) P477, 185 pp., December 1998.
  109. Ma, Z., Huo, X., Tadros, M. K., and Baishya, M.  “Restraint Moments in Precast/Prestressed Concrete Continuous Bridges,” PCI Journal, Vol. 42, No. 6, Nov-Dec., 1998, pp. 40-57.
  110. Tadros, Maher K., “Recent Investigation of Concrete Bridge Superstructures in the U.S.A.,” Proceedings of the Annual Convention of the Mexican Precast Concrete Association, San Luis Potosi, November 1998, 18 pp.
  111. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “NUDECK- An Efficient and Economical Precast Bridge Deck System”, PCI Journal, September-October, Vol. 43, No. 5, 1998, pp. 56-74, see also discussion, Vol. 44, No. 2, pp. 94-95.
  112. Tadros, M. K. and Khalifa, M. A., “Post-tensioning Anchorage in Concrete I-Girder Bridges,” Nebraska Department of Roads, Project Number SPR-PL-1 (31) P486, 173 pp., October 1998.
  113. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “NUDECK- A New Prestressed Stay-In-Place Concrete Panel for Bridge Decks”, Proceeding of the 5th International Conference On Short and Medium Span Bridge, CSCE, Calgary, Alberta, Canada, July 13-17, 1998.
  114. Badie, S.S.; Kamel, M.R, and Tadros, M.K. “An Efficient Box Beam for Short Span Bridges”, Proceeding of the 5th International Conference On Short and Medium Span Bridge, CSCE, Calgary, Alberta, Canada, July 13-17, 1998.
  115. Yamane, T.; Tadros, M.K.; Badie, S.S., and Baishya, M.C. “Full-Depth Precast Prestressed Concrete Bridge Deck System”, PCI Journal, May-June, Vol. 43, No. 3, 1998, pp. 50-66.
  116. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “An Innovative Stay-in-Place Precast Prestressed Sub-Panel for Bridge Decks”, XIII FIP Congress and Exhibition, Amsterdam, the Netherlands, May 23-29, 1998, pp. 187-190.
  117. Yamane, Takashi, Badie, Sameh S., Baishya, Mantu C., and Tadros, Maher K. “Full Depth Two-way Precast Prestressed Concrete Bridge Deck System”, accepted for publication in XIII FIP Congress, Amsterdam, May 23-29, 1998, pp. 325-326.
  118. Badie, Sameh S., Baishya, Mantu C., and Tadros, Maher K., “An Innovative Stay-in-Place Precast Pretensioned Sub-panel for Bridge Decks”, accepted for publication in XIII FIP Congress, Amsterdam, May 23-29, 1998.
  119. Ma, Z., Tadros, M. K., and Baishya, M.  “Shear Behavior of High-Performance Prestressed Concrete Composite I-girders,” Proceedings of the XIII FIP Congress, Vol. 2, pp. 943 – 946, Amsterdam, May 23-29, 1998.
  120. Ma, Z., Saleh, M., and Tadros, M. K.  “Optimized Anchorage Zone Details for I-girder Bridges,” Proceedings of the XIII FIP Congress, Vol. 1, pp. 465 – 466, Amsterdam, May 23-29, 1998.
  121. Saleh, M., and Tadros, M. K.  “Design and Construction of the First US High Performance Concrete Bridge” Proceedings of the XIII FIP Congress, Vol. 1, pp. 391-392, Amsterdam, May 23-29, 1998.
  122. Tadros, M. K., Baishya, M., Ma, Z., and Badie, S.  “Structural Performance of High-Strength Prestressed Concrete Bridge Beams,” ACI Symposium: High Performance Concrete: A Look Back, A Look Ahead, A Tribute to Paul Zia, March, 1998, ACI Special Publication.
  123. Tadros, Maher K. and Saleh, M.A., “Strand Bond in Prestressed Concrete members,” PCI Journal, Precast/Prestressed Concrete Institute, PCI Journal, Prestressed/Precast Concrete Institute, Vol. 43, No. 1, January/February 1998, pp. 86-90.
  124. Badie, Sameh S., Baishya, Mantu C., and Tadros, Maher K., “Continuous Prestressed Concrete Bridge Deck Sub-panel,” Transportation Research Board, 77th Annual Meeting, January 10-15, 1998, Washington D.C.
  125. Baishya, Mantu C., and Tadros, Maher K., “Innovative Stay-in-Place Precast Pretensioned Sub-panel for Efficient Bridge Deck Construction,” 1997 ACI Fall Convention, November 9-14, 1997, Atlanta, GA.
  126. Ma, Zhongguo, Tadros, Maher K. and Baishya, Mantu C. “Shear Limit of HPC I-Girders,” Proceedings of PCI/FHWA International Symposium on High Performance Concrete, October 20-22, 1997, pp. 431-442.
  127. Huo, Xiaoming and Tadros, Maher K., “Time Dependent Effects in High Performance Concrete Bridge Members,” Proceedings of PCI/FHWA International Symposium on High Performance Concrete, October 20-22, 1997, pp. 419-430.
  128. Huo, Xiaoming and Tadros, Maher K., “Application of High Performance Concrete in Giles Road Bridge, Nebraska,” Proceedings of PCI/FHWA International Symposium on High Performance Concrete, October 20-22, 1997, pp. 646-656.
  129. Ma, Z., Saleh, M., and Tadros, M. K. “Shear Design of Stemmed Bridge Members - How Complex Should It Be?” PCI JOURNAL, Vol. 42, No. 5, Sept-Oct. 1997, pp. 88-93.
  130. Freyermuth, Clifford reporting for AASHTO-PCI-ASBI Committee, Tadros Member, “AASHTO-PCI-ASBI Segmental Box Girder Standards: A New Product for Grade Separations and Interchange Bridges,” PCI JOURNAL, Vol. 42, No. 5, Sept/Oct. 1997, pp. 32-42.
  131. Kakish, Hussam F., Baishya, Mantu C., and Tadros, Maher K. “Use of Large Studs for Steel Girder Bridge Composite Action”, published in the Proceedings of The Mouchel Centenary Conference on Innovation in Civil & Structural Engineering, Edinburgh, UK, and August 19-21, 1997.
  132. Badie, Sameh S., Baishya, Mantu C., and Tadros, Maher K. “Innovative Continuous Prestressed Concrete Bridge Deck Sub-Panel,” published in the Proceedings of the Mouchel Centenary Conference on Innovation in Civil & Structural Engineering, Edinburgh, UK, and August 19-21, 1997.
  133. Tadros, Maher K., “High Performance Concrete in 120th and Giles Bridge, Sarpy County, Nebraska, Final Report, University of Nebraska Center for Infrastructure Research, Vol. I, pp., August 1997.
  134. Salmon, D.C., Einea, A., Tadros, Maher .K. and Culp, Todd D., "Full Scale Testing of Precast Concrete Sandwich Panels," ACI Journal, V. 94, No. 4, July/August 1997, p. 354-362.
  135. Ma, Zhongguo and Tadros, Maher K., “Shear Strength of HPC I-girder with WWF Shear Reinforcement: Part I,” Proceedings of the International Conference on New Technologies in Structural Engineering, IABSE and FIP, Lisbon, Portugal, July 1997.
  136. Huo, X. and Tadros, Maher K., “Application of High Performance Concrete in Giles Road Bridge, Nebraska, USA,” Proceedings, International Conference on New Technologies in Structural Engineering, Lisbon, Portugal, July 1997.
  137. Ma, Zhongguo and Tadros, Maher K., “Prestressed Concrete Box Girders Made From Unsymmetrical Precast Z-Sections,” Proceedings of the International Conference on New Technologies in Structural Engineering, IABSE and FIP, Lisbon, Portugal, July 1997.
  138. Kamel, Mounir R., Splittgerber, Darin L., Baishya, Mantu C., and Tadros, Maher K., “New Concrete Girder to Deck Connection for Rapid Deck Replacement,” Proceedings of International Conference on New Technologies in Structural Engineering, Lisbon, Portugal, July, 1997, pp. 465-472.
  139. Kamel, M.R., Badie, S.S., and Tadros, M.K. “Precast Pretensioned Trapezoidal Box Girder”, International Conference, New Technologies in Structural Engineering, Lisbon, Portugal, July 1997.
  140. Huo, X. and Tadros, Maher K., “Time-dependent Effects on Concrete Members in Bridges,” Proceedings, International Conference on New Technologies in Structural Engineering, Lisbon, Portugal, July 1997.
  141. Kakish, Hussam F., Splittgerber, Darin L., Baishya, Mantu C., and Tadros, Maher K., “Connection Systems for Composite Action in I-Girder Bridges,” Proceedings of International Conference on New Technologies in Structural Engineering, Lisbon, Portugal, July 3-5,1997, pp. 473-480.
  142. Saleh, M., Einea, A., Tadros, M.K., and Brady, P., “A New Hybrid Joist System,” The International Conference on High Strength Concrete, Engineering Foundation, 13-18 July 1997, Kona, Hawaii, to be published in Conference Proceedings in 1998.
  143. Ma, Zhonghuo, and Tadros, Maher K., “Shear Strength of HPC I-Girder with WWF Reinforcement,” The International Conference on High Strength Concrete, Engineering Foundation, 13-18 July 1997, Kona, Hawaii, to be published in Conference Proceedings in 1998.
  144. Huo, Xiaoming, Tadros, Maher K., ”Time Dependent Effects in Prestressed Concrete Composite Bridge Members,” The International Conference on High Strength Concrete, Engineering Foundation, 13-18 July 1997, Kona, Hawaii, to be published in Conference Proceedings in 1998.
  145. Einea, Amin, and Tadros, Maher K., “An Efficient FRP Connector for Concrete Sandwich Panels,” Paper No. S94, Proceedings, International Conference on Rehabilitation and Development of Civil Engineering Infrastructure Systems, June 9-11, 1997, American University of Beirut, Lebanon, pp. 209-225.
  146. Saleh, M., Brady, P.A., Tadros, M.K., and Einea, A., “Design and Performance Testing of Prestressed Precast Concrete Hybrid Joists,” Construction Productivity Advancement Research Program (CPAR), USACERL Technical Report No. 97-xx, April 1997, p. 100.
  147. Saleh, M., Brady, P.A., Einea, A., and Tadros, M.K., “Design and Performance Testing of Prestressed Precast Reinforced Concrete Double-tee Beams with Web Openings,” Construction Productivity Advancement Research Program (CPAR), USACERL Technical Report No. 97-xx, April 1997, p. 90.
  148. Saleh, Mohsen, and Tadros, Maher K, “Maximum Reinforcement in Prestressed Concrete Members, “PCI Journal, Vol. 42, No. 2, March/April 1997, p143-144.
  149. Tadros, Maher K., Badie, Sameh S., “Problems and Solutions, Pretensioning of Curved or Chorded Members”, PCI Journal, Vol. 42, No. 1, January/February, 1997, p. 92-93.
  150. Huo, X. and Tadros, Maher K., “Application of High Performance Concrete in Bridge Design,” PCI Journal, Vol. 42, No. 1, January/February 1997, p. 94.
  151. Huo, X. and Tadros, M.K., “Cylinder Testing for Acceptance of Precast Prestressed Concrete Bridge Girders,” PCI Journal, Vol. 42, No. 1, January/February 1997, p. 95.
  152. Huo, X. and Tadros, Maher K., “Allowable Compressive Strength of Concrete at Prestress Release,” PCI Journal, Vol. 42, No. 1, January/February 1997, p. 95-99.
  153. Tadros, M.K. and Badie, S.S. “Pretensioning of Curved or Chorded Members”, PCI Journal, Vol. 42, No. 1, January/February, 1997, Problems and Solutions, pp 92-93.
  154. Low Say-Gunn, Tadros, Maher K., Einea, Amin, and Magana, Rafael, “Seismic Behavior of a Six Story Precast Concrete Office Building,” PCI Journal, Vol. 41, No. 6, November/December 1996, p.56-75.  
  155. Yelton, Rick (based on information provided by Tadros and others), “Projects Bridge Gap between HPC Problems and Solutions,” Concrete Journal, Aberdeen Group, Chicago, Illinois, October 1996, pp. 674-678.
  156. Kamel, Mounir R., and Tadros, Maher K., “The Inverted Tee Shallow Bridge System for Rural Areas,” PCI Journal, Vol. 41, No. 5, Sept. /Oct. 1996, p. 28-43.
  157. Devalapura, Ravi K., Krause, Gary L., Tadros, Maher K., “Development and Testing of     Prestressed Clay Brick Walls, TMS Journal, August 1996, pp. 99-112.
  158. Bowser, J. D., Krause, Gary L, Tadros, Maher K., “Freeze-Thaw Durability of High Performance Concrete Masonry Units,” ACI Materials Journal, V. 93, No. 4, July-August 1996, pp. 386-394.
  159. El-Remeily, Ahmad, Tadros, Maher K., Yamane, Takashi, “Transverse Design of Adjacent Precast Prestressed Concrete Box Girder Bridges, PCI Journal, Vol.41, No. 4, July/August 1996, p. 96-113.
  160. Einea, A., Saleh, M., Huo, X, and Tadros, M.K., “High Performance Concrete for Giles Road Bridge,” ASCE Structures Congress, Proceedings, High Performance Concrete and Composite Materials in Bridges, April 1996, p. 133-140.
  161. Tadros, Maher K., and Baishya, Mantu C., Disc. “A Review of Strand Development Length for Pretensioned Concrete Members,” PCI Journal, V. 41, No. 2, March-April 1996, pp. 112-127.
  162. Kamel, Mounir R., Benak, Joseph V., Tadros, Maher K. and Mostafa Jamshidi, "Prestressed Concrete Piles in Jointless Bridges," PCI Journal, Vol. 41, No. 2, March/April 1996, p. 56-67.
  163. Benak, Joseph V., Tadros, Maher K., “Precast Prestressed Concrete Piles Integral Abutment Bridges, Phase 2, Field Studies,” UNL Research Report, March 1996. 76 p.
  164. Hodhod, Osama A., Khalifa, Magdi A., Tadros, Maher K., “The Lincoln Composite Bridge: A Feasibility Study,” UNL, Final Report, February 1996, 156 p.
  165. Savage, John, Tadros, Maher K., Arumugasaamy, Panchy and Fischer, Larry G., "Behavior and Design of Double Tees with Web Openings," PCI Journal, Vol. 41, No. 1, Jan. /Feb. 1996, p. 46-62.
  166. Saleh, M, Einea, A, and Tadros, M.K., “New Methods for Creating Continuity in Precast Concrete Girder Bridges,” Proceedings, The Nebraska Academy of Sciences, 115th annual meeting, 1995.
  167. Einea, A., Saleh, M., Huo, X, and Tadros, M.K., “High Performance Concrete Bridge in Sarpy County, Nebraska,” PCI Annual Convention, Reno, Nevada, October 15-18, 1995.
  168. Kamel, Mounir R., Benak, Joseph V., Tadros, Maher K. and Mostafa Jamshidi, "Application of Precast Prestressed Concrete Piles in Integral Abutment Bridges," Proceedings, Fourth International Bridge Engineering Conference, San Francisco, California, August 28-30, 1995, pp. 146-157.
  169. Khalifa, Magdi A., Tadros, Maher K. and Osama Hodhod, "Use of FRP in Major Transportation Facilities," Proceedings, International Association of Bridge and Structural Engineering Symposium, San Francisco, California, August 1995.
  170. Saleh, Mohsen A., Einea, Amin and Maher K. Tadros, "Innovative Methods for Creating Continuity in Precast Concrete Girder Bridges," Concrete International, August 1995, Vol. 17, No. 8, pp. 27-32.
  171. Low, Say-Gunn, Einea, Amin, Tadros, Maher K., Huo, Xiaoming, and David Salmon, "Inelastic Dynamic Analysis of a Precast Concrete Office Building Subjected to Moderate Seismicity," Proceedings, Seventh Canadian Conference on Earthquake Engineering, Montreal, Quebec, Canada, June 5-7, 1995, pp. 501-508.
  172. Khalifa, Magdi A. and Maher K. Tadros, "Design Challenges of a Fully Composite Long-Span Bridge," Proceedings, ASCE Congress, Boston, Massachusetts, April 1995.
  173. Huo, X., Savage, John M. and Maher K. Tadros, "Re-examination of the Service Load Limit Compressive Stress in Prestressed Concrete Members," ACI Structural Journal, Vol. 92, No.2, March/April 1995, pp. 199-210.
  174. Yamane, T., Baishya Mantu C., and Tadros, Maher K., “Precast Pretensioned Concrete Bridge Deck for Rapid Construction,” ACI Spring Session, Salt Lake City, March 7, 1995.
  175. Einea, Amin, Yamane, Takashi and Maher K. Tadros, "Grout-Filled Pipe Splices for Precast Concrete Construction," PCI Journal, Vol. 40, No. 1, January-February 1995, pp. 82-93.
  176. Khalifa, Magdi and M.K. Tadros, "North American First Cable-Stayed Footbridge using Fiber-Reinforced Plastics," Proceedings, ASCE 1994 Materials Engineering Conference: New Materials and Methods for Repair, San Diego, California, November 1994.
  177. Khalifa, Magdi A. and Maher K. Tadros, "The Bridge: A 1,000-ft Fiber Reinforced Plastic Cable-stayed Footbridge for the City of Lincoln," Proceedings, International Conference on Composites Engineering, New Orleans, Louisiana, October 1994.
  178. Amiri, Babrak, Krause, Gary L. and Maher K. Tadros, "Lightweight high-performance Concrete Masonry-Block Mix Design", ACI Materials Journal, vol. 91, no. 5, September-October 1994, pp. 495-501.
  179. Tadros, M.K., Subcommittee Chairman, PCI Journal Advisory Committee, "Author Guidelines for Preparing PCI JOURNAL Manuscript Submissions," PCI Journal, vol. 39, no. 5, September/October 1994, pp. 113-116.
  180. Einea, Amin and Maher K. Tadros, "An Innovative Technique for Achieving Continuity in Precast Prestressed Girder Bridges," Proceedings, 4th International Conference on Short and Medium Span Bridges, Halifax, Nova Scotia, Canada, August 8-11, 1994, pp. 141-152.
  181. Einea, Amin, Salmon, David C., Tadros, Maher K. and Todd Culp, "A New Structurally and Thermally Efficient Precast Sandwich Panel System", PCI Journal, vol. 39, no. 4, July/August 1994, pp. 90-101.
  182. Devalapura, Ravi K., Krause, Gary, and M.K. Tadros, "Experimental Investigation on the Flexural Behavior of Prestressed Masonry," Proceedings, 10th International Brick/Block Masonry Conference, Calgary, Alberta, Canada, July 1994, vol. 2, pp. 609-618.
  183. Geren, K. Lynn and Maher K. Tadros, "The NU Precast/Prestressed Concrete Bridge I-Girder Series," PCI Journal, vol. 39, no. 3, May/June 1994, pp. 26-39.
  184. Magana, R.A., Tadros, M.K., Einea, A., Low, S.G. and A.E. Schultz, "Seismic Behavior of a Six-Story Precast Office Building,” Proceedings, XII FIP Congress," Washington, D.C., May 30 to June 2, 1994, vol. 1, pp. E16-E22.
  185. Savage, J., Arumugasaamy, P., Tadros, M.K., Einea, A., and L. Fischer, "Precast Prestressed Concrete Double Tee with Web Openings," Proceedings, XII FIP Congress," Washington, D.C., May 30 to June 2, 1994, vol. 1, pp. C48-C54.
  186. Yamane, T., Arumugasaamy, P., and M.K. Tadros, "Short to Medium Span Precast Prestressed Concrete Bridges in Japan,” PCI Journal, vol. 39, no. 2, March/April 1994, pp. 74-100.
  187. Khalifa, Magdi A., Tadros, Maher K., Low, Say-Gunn and Ahmed E. Magzoub, "Shape Optimization of an Ultra-Lightweight CMU," The Masonry Society Journal, vol. 12, no. 2, February 1994, pp. 16-23.
  188. Devalapura, Ravi K., Krause, Gary L. and Maher K. Tadros, "State-of-the-Art of Masonry Retaining Walls", The Masonry Society Journal, vol. 12, no. 2, February 1994, pp. 46-59.
  189. Khalifa, M. and M.K. Tadros, "A New Light Concrete Masonry Unit," Proceedings, Fifth International Colloquium on Concrete in Developing Countries, Cairo, Egypt, January 1994, pp. 944-957. 
  190. Tadros, M.K., Einea, A., Ficenec, J. and S. Kneip, "A New Continuous Precast Concrete Bridge System," Proceedings, Fifth International Colloquium on Concrete in Developing Countries, Cairo, Egypt, January 3-6, 1994, pp. 398-409.
  191. Geren, K.L. and M.K. Tadros, "The Next Generation of Precast Concrete I-Girder Shapes," Proceedings, Fifth International Colloquium on Concrete in Developing Countries, Cairo, Egypt, January 3-6, 1994, pp. 507-516.
  192. Kamel, M., Benak, J.V., Tadros, M.K. and M. Jamshidi, "Precast Prestressed Concrete Piles in Integral Abutment Bridges," Proceedings, Fifth International Colloquium on Concrete in Developing Countries, Cairo, Egypt, January 3-6, 1994, pp. 453-466.
  193. Abdel-Karim, Ahmad M., Tadros, Maher K. and Joseph V. Benak, "Structural Response of full-scale Concrete Box Culvert," Journal of Structural Engineering, American Society of Civil Engineers, Vol. 119, No. 11, November 1993, pp. 3238-3254. 
  194. Tadros, Maher K., Einea, Amin, Low, Say-Gunn, Magana, Rafael A., and Arturo E. Schultz, "Seismic Resistance of A Six-Story Totally Precast Office Building," Proceedings of the FIP Symposium, Kyoto, Japan, October 1993.
  195. Geren, K. Lynn and Maher K. Tadros, "Optimization of Precast/Prestressed Concrete Bridge I-Girders," Proceedings of the FIP Symposium, Kyoto, Japan, October 1993.
  196. Tadros, Maher K., Einea, Amin, Ficenec, Joseph A. and Steve Holdsworth, "A New Technique to Create Continuity in Prestressed Concrete Members", PCI Journal, vol. 38, no. 5, September/October 1993, pp. 30-37.
  197. Ficenec, Joseph A., Kneip, Steven D., Tadros, Maher K. and Larry G. Fischer, "Prestressed Spliced I-Girders: Tenth Street Viaduct Project", PCI Journal, vol. 38, no. 5, September/October 1993, pp. 38-48.
  198. Low, Say-Gunn, Tadros, Maher K., Khalifa, Magdi A., Einea, Amin, Magzoub, Ahmed E. and Ervell Staab, "A New Concrete Masonry Unit for Improved Construction Productivity," The Journal of the American Institute of Constructors, vol. 17, no. 3, September 1993, pp. 2-7.
  199. Amiri, Babrak, Krause, Gary L., Tadros, Maher K. and Geary Combs, " Mix Design of Lightweight high-performance Masonry Block", Proceedings, Sixth North American Masonry Conference, Philadelphia, Pennsylvania, June 1993, Vol. 2, pp. 1037-1052.
  200. Bowser, Joan D., Kulkarni, Savita M., Tadros, Maher K., Krause, Gary L. and Steve C. Sweeney, "Water Penetration and Absorption of High Performance Lightweight Concrete Masonry Units", Proceedings, Sixth North American Masonry Conference, Philadelphia, Pennsylvania, June 1993, pp. 465-476.
  201. Low, Say-Gunn, Tadros, Maher K., Einea, Amin, Khalifa, Magdi A., Magzoub, Ahmed E. and Ervell Staab, "Shape Optimization of Concrete Masonry Units", Proceedings, Sixth North American Masonry Conference, Philadelphia, Pennsylvania, June 1993, pp. 837-848.
  202. Geren, K. Lynn and Maher K. Tadros, "The Next Generation of Precast Concrete I-Girder Shapes," Proceedings, 10th Annual International Bridge Conference, Pittsburgh, Pennsylvania, June 1993, pp. 146-152.
  203. Ficenec, Joseph A., Kneip, Steven D., Tadros, Maher K. and Amin Einea, "A New Continuous Precast Concrete Bridge System," Proceedings, 10th Annual International Bridge Conference, Pittsburgh, Pennsylvania, June 1993, pp. 126-133.
  204. Abdel Karim, Ahmad M., and Maher K. Tadros, "Computer Analysis of Spliced Girder Bridges," ACI Structural Journal, vol. 90, no. 1, January-February 1993, pp. 21-31.
  205. Abdel Karim, A. and Tadros, M.K., "State‑of‑the‑Art of Precast/Prestressed Spliced-Girder Bridges." prepared for the PCI Bridge Committee, published as a Special Committee Report by the Precast/Prestressed Concrete Institute, October 1992.
  206. Devalapura, Ravi K., and Maher K. Tadros, Discussion to "Unified Design Recommendations for Reinforced, Prestressed, and Partially Prestressed Concrete Bending and Compression Members" by Antoine E. Naaman, ACI Structural Journal, vol. 89, no. 5, September/October 1992, pp. 596‑597.
  207. Devalapura, Ravi K., and Maher K. Tadros, Discussion to "Unified Design Provisions for Reinforced and Prestressed Concrete Flexural and Compression Members" by Robert F. Mast, ACI Structural Journal, vol. 89, no. 5, September/October 1992, pp. 591‑592.
  208. Devalapura, Ravi K., and Maher K. Tadros, "Critical Assessment of ACI 318 Eq. (18‑3) for Prestressing Steel Stress at Ultimate Flexure", ACI Structural Journal, vol. 89, no. 5, September/October 1992, pp. 538‑546.
  209. Abdel‑Karim, Ahmad M., and Maher K. Tadros, "Design and Construction of Spliced I‑Girder Bridges", PCI Journal, Precast/Prestressed Concrete Institute, vol. 37, no. 4, July/August 1992, pp. 114‑122.
  210. Geren, K. Lynn, Abdel‑Karim, Ahmad M., and Maher K. Tadros, "Precast/Prestressed Concrete Bridge I‑Girders: The Next Generation," Concrete International, Vol. 14, No. 6, June 1992, pp. 25‑28.
  211. Geren, K. Lynn and Maher K. Tadros, "Optimization of Precast/Prestressed Concrete I‑Girder for Use in Continuous Span Bridges," 8th US‑Japan Bridge Engineering Workshop, Chicago, Illinois, sponsored by the National Science Foundation and the University of Nevada, Reno, May 1992.
  212. Devalapura, Ravi and Maher K. Tadros, "Stress‑Strain Modeling of 270 ksi Low‑Relaxation Prestressing Strands," PCI Journal, Precast/Prestressed Concrete Institute, vol. 37, no. 2, March/April 1992, pp. 100‑106.
  213. Tadros, M.K., Abdel-Karim, A.M. and G. Fogarasi, "North-American Experience with Spliced-Girder Bridges," Proceedings of the FIP '92 Symposium, vol. 2, p. 655-662, Budapest, Hungary, 1992.
  214. Abdel‑Karim, Ahmad M. and Maher K. Tadros, "PC Based Serviceability Analysis of Spliced‑Girder Bridges," Proceedings, Tenth Structures Congress, American Society of Civil Engineers, San Antonio, Texas, April 13‑15, 1992.
  215. Abdel‑Karim, Ahmad, M. and Tadros, M.K., "Splicing Increases Span Capabilities of Precast Bridge I‑Girders," Proceedings, National Concrete Engineering Conference, Chicago, Illinois, April 1992.
  216. Devalapura, R.K., and Tadros, M.K., "Innovative Retaining Wall Systems," Proceedings of the Nebraska Academy of Sciences, Nebraska Wesleyan University, Lincoln, NE, April 1992.
  217. Einea, Amin, Salmon, David C., Fogarasi, Gyula J., Culp, Todd D., and Tadros, Maher K., “State-of-the Art of Precast Concrete Sandwich Panels,” PCI Journal, Vol. 36, No. 6, November/December 1991, p. 
  218. Joo, Y.S. and Tadros, M.K., "Serviceability of Prestressed Composite Members,” Computer Analysis of the Effects of Creep, Shrinkage, and Temperature Changes on Concrete Structures, Detroit: ACI, pp. 171‑188, 1991.
  219. Low, Say‑Gunn, Tadros, Maher K., and Nijhawan, Jagdish C., “A New Framing System for Multistory Buildings," Concrete International, Vol. 13, No. 9, September 1991, p. 54‑57.
  220. Abdel‑Karim, A. and Tadros, Maher K., "Stretched‑Out Precast Concrete I‑Girder Bridge Spans," Concrete International, Vol.13, No. 9, September 1991, p. 37‑40.
  221. Low, S‑G. Tadros, M.K., and Nijhawan, J., "Seismic Resistant Precast Concrete Office Framing,"Modern Applications of Prestressed Concrete, Proceedings of the International Symposium on Modern Applications of Prestressed Concrete, September 3‑6, 1991, Beijing, China, pp. 385‑398.
  222. Fogarasi, G., Einea, A., Tadros, M., and Culp, T., “American and European Experience with Sandwich Panels,” Modern Applications of Prestressed Concrete, Proceedings of the International Symposium on Modern Applications of Prestressed Concrete, September 3‑6, 1991, Beijing, China, pp. 415‑422.
  223. Devalapura, R. and Tadros, M., "Modeling of Stress‑Strain Behavior of Prestressing Tendons," "Modern Applications of Prestressed Concrete, Proceedings of the International Symposium on Modern Applications of Prestressed Concrete, September 3‑6, 1991, Beijing, China, pp. 328‑335.
  224. Low, S‑G. Tadros, M.K., and Nijhawan, J., "Minimization of Floor Thickness in Precast Prestressed Concrete Multistory Buildings," PCI Journal, Vol. 36, No. 4, July/August 1991, p. 74‑92.
  225. ACI Committee, Tadros, M. ‑ member, "State‑of‑the‑Art Report on Control of Two‑Way Slab Deflections," ACI Structural Journal, Vol. 88, No. 4, July/August 1991, p. 501‑514.
  226. Schoepfer, J. and Tadros, M., "Analysis of Reinforced Masonry Walls for In and Out of Plane Forces," Proceedings, International Symposium on Computer Methods in Structural Masonry,” April 3‑5, 1991, Swansea, United Kingdom.
  227. Fogarasi, G., Tadros, M.K., and Nijhawan, J., "World Overview of the Flow Line Precasting Method," PCI Journal, Vol. 36, No. 2, March/April 1991, pp. 38 ‑55.
  228. Devalapura, R. and Tadros, M.K., "Prestressing Steel Stress‑Strain Modeling," prepared for the PCI Industry Handbook Committee for possible inclusion in the 5th Edition of the Handbook also a possible PCI Journal paper, February 1991, 15 pp.
  229. Abdel‑Karim, A.M., Tadros, M.K., and Benak, J.V., "Live Load Distribution on Concrete Box Culverts," Transportation Research Record No. 1288, 1990.
  230. Tadros, M.K., Einea, Amin, and Abdel Karim, A., "A New Folded Plate Bridge/Culvert System,” 5th International Conference on Low‑Volume Roads, Transportation Research Record, No. 1291.
  231. Schoepfer, J. and Tadros, M.K., "The Analysis of Masonry Walls for In‑ and Out‑of‑Plane Forces," Proceedings, International Symposium on Computer Methods in Structural Masonry, Swansea, United Kingdom, Vol. 1 pp. 256‑271, June 1990.
  232. Tadros, M.K., Schoepfer, J. and Littler, D., "Bracing of Masonry Walls during Construction," Proceedings, North American Masonry Conference, Champaign, Illinois, June 1990; Vol. IV, pp. 1243‑1254.
  233. Thiele, D.J., Tadros, M.K. and Benak, J.V., "State of the Art for Control of Bridge Approach Settlement," presented at the 8th Structures Congress, American Society of Civil Engineers, Baltimore, Maryland, 1990; published in Bridge Evaluation, Repair and Rehabilitation, NATO ASI Series, Kluwer Academic Publishers, Dordrecht, Netherlands, 1990, pp. 57‑70.
  234. Abdel‑Karim, A., Tadros, M.K., and Benak, J.V., "Live Load Distribution on Box Culverts," Annual Meeting of the Transportation Research Board, Washington, D.C., 1990; presented at the Annual Transportation Research Board Meeting.
  235. Tadros, M.K., Benak, J.V. and Gilliland, M.K., "Soil Pressure on Box Culverts," Structural Journal, American Concrete Institute, Vol. 86, No. 4, July/August 1989, pp 439‑450.
  236. Horton, R.T., Tadros, M.K. and Bexten, K.A., "Deflection Control in Masonry Walls," Proceedings, 5th Canadian Masonry Symposium, University of British Columbia, Vancouver, B.C., June 1989, pp 229‑240.
  237. Bexten, K.A., Tadros M.K., Horton, T.R., "Compression Strength of Masonry," Proceedings, 5th Canadian Masonry Symposium, University of British Columbia, Vancouver, B.C., June 1989, pp 629‑639.
  238. Tadros, M.K., Benak, J.V., Abdel‑Karim, A. and Bexten, K., "Field Testing of a Reinforced Concrete Box Culvert," Transportation Research Board Record series 1239, 1989, pp. 49‑55.
  239. Tadros, M.K., Yousef, A. and Joo, Y.S., "Effects of Support Settlement in Concrete Members." American Concrete Institute, Special Publication, SP‑117‑9, 1989, pp 185‑213.
  240. Tadros, M.K., Belina, C. and Meyer, D., "Reinforced Concrete Box Culverts ‑ Current Design Practice," accepted for publication, Transportation Research Board, 1988, 30 pp.
  241. Skogman, B.C., Tadros, M.K. and Grasmick, R., "Ductility of Reinforced and Prestressed Concrete Flexural Members," Journal, Prestressed Concrete Institute, Vol. 33, No. 6, Nov. /Dec. 1988, pp 94‑107.
  242. Skogman, B.C., Tadros, M.K. and Grasmick, R., "Flexural Strength of Prestressed Concrete Members," Journal, Prestressed Concrete Institute, Vol. 33, No. 5, Sept. /Oct. 1988, pp 96‑123.
  243. Tadros, M.K., Benak, J.V., Meyer, D.W., Abdel‑Karim, A. and Bexten, K.A., "Field Instrumentation of a Double‑Cell Concrete Box Culvert," Proceedings, Bridge Research in Progress, NSF Symposium (Drs. Klaiber and Sanders, Directors), Iowa State University, Des Moines, Iowa, Sept. 26‑27, 1988, pp 149‑152.
  244. Tadros, M.K., Belina, C. and Meyer, D., "Current Practice of Reinforced Culvert Design," presented at the 67th Annual Meeting of the Transportation Research Board, Washington, D.C., and Jan. 1988.  Also published in Transportation Research Board Record, #1191, pp 65‑72, 1988.
  245. Tadros, M.K., and Joo, Y.S., "Precast Concrete Storage Tanks,” Concrete International, American Concrete Institute, Vol. 9, No. 11, November 1987, pp 40‑43.
  246. Tadros, M.K. et al, "Recommended Practice for Precast Prestressed Concrete Circular Storage Tanks," A Prestressed Concrete Institute committee report primarily authored by Tadros and Joo, Prestressed Concrete Institute Journal, Vol. 32, No. 4, July/August 1987, pp 80‑125.
  247. Tadros, M.K. and Ghali, A., "Deflection of Cracked Prestressed Concrete Members," American Concrete Institute, Special Publication, DP‑86, 1985, pp 137‑166.
  248. Ghali, A. and Tadros, M.K., "Partially Prestressed Concrete Structures," Proceedings of the American Society of Civil Engineers, Journal of the Structural Division, Vol. 111, No. 8, August 1985, pp 1846‑1865.
  249. Tadros, M.K., "Flexural Behavior of Reinforced Concrete Masonry Members," Proceedings, Third North American Masonry Conference, Arlington, Texas, by The Masonry Society, June 1985, pp 31‑1 through 31‑17.
  250. Peterson, D.N. and Tadros, M.K., "Simplified Flexural Design of Partially Prestressed Concrete Members," Journal, Prestressed Concrete Institute, Vol. 30, No. 3, May‑June 1985, pp 50‑69.
  251. Tadros, M.K. and Holmes, W., "Small Computers for Concrete Building Design," Concrete International, American Concrete Institute, Vol. 6, No. 3, March 1984, pp 17‑24.  Translated into Spanish by the Instituto Mexicano Del Cemento y Del Concreto and published in the IMCYC magazine, Issue No. 166, Vol. 22, February 28, 1985.
  252. Tadros, M.K., Ghali, A. and Meyer, A.W., "Prestress Loss and Deflection of Precast Concrete Members," Journal, Prestressed Concrete Institute, Vol. 30, No. 1, Jan. /Feb. 1985, pp 114‑141.
  253. Tadros, M.K., "Flexural Behavior of Partially Prestressed Members," NATO‑Advanced Research Workshop, Paris, France; June 1984, 20 pp.
  254. Tadros, M.K. and Sulieman, H., "Application of the I‑Effective Method in Calculating Deflections of Partially Prestressed Members," Journal, Prestressed Concrete Institute, Vol. 28, No. 6, Nov./Dec. 1983, discussion, pp 131‑136.
  255. Meyer, A. and Tadros, M.K., "Time‑Dependent Deflection of Cracked Prestressed Members," Proceedings, International Symposium for Nonlinearity in Prestressed Concrete; Canada, July 1983, Vol. 1, pp 123‑146.
  256. Tadros, M.K. and Peterson, D., "Code Consideration of Flexural Design with Partial Prestressing," Proceedings, International Symposium for Nonlinearity in Prestressed Concrete, Canada, July 1983, Vol. III, pp 125‑156.
  257. "State‑of‑the‑Art of Precast Concrete Storage Tanks," A PCI Committee Report primarily authored by Tadros, M.K. and Belina, C., Journal, Prestressed Concrete Institute, Vol. 27, No. 4, July/August 1983, pp 36‑83.
  258. Tadros, M.K., "Commentary on Special Research and Development Program," Journal, Prestressed Concrete Institute, Vol. 27, No. 4, July/August 1983, pp 168‑171.
  259. Siala, T. and Tadros, M.K., "Discussion of ACI Committee 318 Report on Proposed Revisions to Building Code Requirements for Reinforced Concrete," Concrete International, American Concrete Institute, Vol. 5, No. 6, June 1983, pp 73‑74.
  260. Tadros, M.K., "Expedient Service Analysis of Cracked Prestressed Concrete Sections," Journal, Prestressed Concrete Institute, Vol. 27, No. 6, Nov. /Dec., 1982, pp 86‑111.  See also comments by Bachman, Bennett, Branson, Brodum‑Nielsen, Bruggeling, Moustafa, Nilson, Rao and Natarajan, Ramaswamy, Shaikh, and Author, Vol. 28, No. 6, Nov. /Dec. 1983, pp 137‑158.
  261. Tadros, M.K., "Flexural Strength of Prestressed Concrete Members with Unbounded Tendons," Journal, Prestressed Concrete Institute, Vol. 27, No. 5, Sept. /Oct. 1982, discussion.
  262. Moulton, L.K., GangaRao, H.V.S., Tadros, M.K. and Halvorsen, G.T., "Tolerable Movement Criteria for Highway Bridges‑Field Studies," presented at American Society of Civil Engineers Annual Convention, Hollywood, FL, Oct. 1980, 18 p.
  263. Moulton, L.K., GangaRao, H.V.S., Tadros, M.K. and Halvorsen, G.T., "Tolerable Movement Criteria for Highway Bridges‑Analytical Studies," presented at American Society of Civil Engineers Annual Convention, Hollywood, FL, Oct. 1980, 18 p.
  264. Tadros, M.K., Ghali, A. and Dilger, W.H., "Long‑Term Stresses and Deformations of Segmental Bridges," Journal, Prestressed Concrete Institute, May/June 1979, pp 66‑87.
  265. Tadros, M.K. and Jittawait, V., "Loss of Prestress Due to Relaxation after Transfer," Journal, American Concrete Institute, Vol. 75, No. 8, pp 415‑416, discussion.
  266. Tadros, M.K., Ghali, A. and Dilger, W.H., "Time‑Dependent Stresses and Deformations of Segmental Structures," Proceedings, 8th Congress of the FIP, Federation Internationale de la Precontrainte (International Federation for Prestressing), London, England, May 1978, 29 pp.
  267. Tadros, M.K., Ghali, A. and Dilger, W.H., "Effects of Non‑ prestressed Steel on Prestress Loss and Deflection," Journal, Prestressed Concrete Institute, Vol. 22, No. 2, March/April 1977, pp 50‑63.
  268. Tadros, M.K., Ghali, A. and Dilger, W.H., "Time‑Dependent Analysis of Composite Frames," Proceedings of the American Society of Civil Engineers, Journal of the Structural Division, Vol. 103, No. ST4, April 1977, pp 871‑884.
  269. Tadros, M.K., "Design Charts for Reinforced Concrete L‑Sections,” Canadian Journal of Civil Engineering, Vol. 3, No. 4, Dec. 1976, pp 479‑483.
  270. Tadros, M.K. and Ghali, A., "Recommendations for Estimating Prestress Losses," Journal, Prestressed Concrete Institute, Vol. 21, No. 2, March/April 1976.
  271. Tadros, M.K., Ghali, A. and Dilger, W.H., "Time‑Dependent Prestress Loss and Deflection in Prestressed Concrete Members,” Journal, Prestressed Concrete Institute, Vol. 20, No. 3, May/June 1975, pp 86‑98 (Translated into Japanese by the Japan Concrete Institute).
  272. Tadros, M.K., "The Deformation of Noncomposite and Composite Prestressed Concrete Members," Journal, American Concrete Institute, discussion, Vol. 72, No. 4, April 1975, pp 176‑177.
  273. Ghali, A., Tadros, M.K. and Dilger, W.H., "Accurate Evaluation of Time‑Dependent Deflection of Prestressed Concrete Frames,” American Concrete Institute, Publication SP‑43, 1974, pp 357‑375.
  274. Tadros, M.K., "Rapid Accurate Evaluation of Prestress Loss,” Journal, American Concrete Institute, discussion, Vol. 71, No. 5, May 1974, pp 271.
  275. Tadros, M.K., Wahab, A.H. and Oseily, H., "Ultimate Strength Design of Reinforced Concrete L‑Sections," Journal, Egyptian Society of Civil Engineers, 1972, pp 21‑36.

Other Publications and Presentations
  1. Morcous, G. Akhnoukh, A, and Tadros, M. “Application of UHPC in Bridge I-Girders”, A Presentation at 2008 Concrete Bridge Conference, PCA, St. Louis, MO, May 2008.
  2. Hanna, K., Morcous, G., and Tadros, M. “Non-Post-Tensioned Transverse Design and Detailing of Adjacent Box Beam Bridges”, A Presentation at 2008 Concrete Bridge Conference, PCA, St. Louis, MO, May 2008.
  3. Morcous, G., and Tadros, G. “Welded Wire Reinforcement versus Random Steel Fibers in Ultra-High Performance Prestressed Concrete Girders”, A Presentation at 2007 Fall Meeting, WRI, Amelia Island, FL, October 2008.
  4. "Progress on the City of Lincoln/NDOR/UNL Pipe Installation Test facility" - Presentation to 52nd Annual Great Plains Waste Management Conference, Council Bluffs, IA, April (9-10), 2008
  5. "Full Scale Test Installation for Reinforced Concrete Pipe" - Paper and presentation to ASCE International Pipelines Conference "PIPELINES 2008", Atlanta, GA, July (22-27), 2008
  6. Hasenkamp C.J., Badie S.S, Tuan C.Y., and Tadros M.K. “Sources Of End Zone Cracking Of Pretensioned Concrete Girders,” 2008 Concrete Bridge Conference, HPC: Safe, Affordable, and Efficient, May 4-7, 2008, Hyatt Regency, St. Louis, Missouri.
  7. Badie S.S., Girgis A., Nguyen N., and Tadros M.K.  “Bigger is Better: Development of the 31.8-mm Diameter Shear Stud for Steel Bridges in USA,” CEB-FIP, 2nd Symposium on Connections between Steel and Concrete, Stuttgart, Germany, September 4-7, 2007, pp 1437-1447.
  8. Badie, S. S., Girgis, A., Sriboonma, K., and Tadros, M. K., “Non-Prestressed Panel-To-Panel Connection Details For Full-Depth Precast Deck Panels,” PCI/NATIONAL BRIDGE CONFERENCE, Paper No. 74, October 22-24, 2007, Phoenix, AZ.
  9. Badie, S. S., Girgis, A., Sriboonma, K., and Tadros, M. K., “Extending Spacing of Horizontal Shear Connection Pockets from 24 to 48 inches for Steel Girders,” PCI/NATIONAL BRIDGE CONFERENCE, Paper No. 32, October 22-26, 2006, Grapevine, TX.
  10. Girgis, A., Badie, S. S., Chaunbing, S., Sriboonma, K. and Tadros, M. K., “Utilization of Full-depth precast concrete bridge deck panels in USA,” The Second Federation Internationale Du Beton Congress, fib, June 2006, Italy.
  11. Badie, S. S., Nguyen, N., Girgis, A. and Tadros M.K., “Development and application of large-size studs in USA” The Second Federation Internationale Du Beton Congress, fib, June 2006, Italy.
  12. Badie, S. S., Girgis, A., Nguyen, N., and Tadros, M. K., “Utilization of large-size studs with precast concrete deck panels,” PCI/NATIONAL BRIDGE CONFERENCE, October 2005, Palm Springs, CA.
  13. Badie, S.S., Patel, P., Tadros, M.K., and Rose, J. “Utilization of Full-Depth, Precast Concrete Deck Panels, Past and Future,” PCI/NATIONAL BRIDGE CONFERENCE, Oct. 17-20, 2004, Atlanta, Georgia.
  14. Tadros, M.K. and Badie, S.S., “Efficient Deck/Girder Connections for Rapid Replacement,” 9th Arab Structural Engineering Conference, Nov. 29 to Dec. 1, 2003, Abu Dahbi, United Arab Emirates.
  15. Sun, C., Girgis, Tadros, M.K., and Badie S.S., “Structural Behavior of Flexural members with High Strength Concrete,” 3rd International Symposium on High Performance Concrete and the PCI National Bridge Conference, Oct. 19-22, 2003, Orlando, FL.
  16. Pong W., Girgis A., and  Tadros, M., “Proposed GFRP Connectors in Sandwich panels,” 7th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, American Concrete Institute, Missouri, Kansas City, November 2005, pp. 21-38.
  17. Tadros, M.,& Girgis, A., “HPC Design implementation in Bridges” Implementation of High-Performance Concrete in Bridge Design, Reinforced Concrete Structures, American Concrete Institute, Missouri, Kansas City, November 2005.
  18. Tardos, M.,” The Magic of Prestressing Confined Concrete” PCI National Bridge Conference, 51st PCI Annual Convention and Exhibition, Palm Springs, California, October 2005.
  19. Sun, C., Hennessey, S, and Tardos, M.,” Value Engineering Arbor Road Bridge Using Curved Precast U-Girders” PCI National Bridge Conference, 51st PCI Annual Convention and Exhibition, Palm Springs, California, October 2005.
  20. Badie, S., Girgis, A., Nguyen, N., Tardos, M., “Utilization of large-size studs with precast concrete deck panels” PCI National Bridge Conference, 51st PCI Annual Convention and Exhibition, Palm Springs, California, October 2005.
  21. Tadros, M., “Innovative High performance Concrete Bridges in Nebraska,” Presented at the Annual WASHTO (Western States AASHTO) meeting in Omaha, NE, July 13, 2005
  22. Holmes, William, and Tadros, Maher K., “Insulated Precast Concrete panel System for Residential Construction,” presented at the annual American Concrete Institute Convention, San Francisco, Ca, Oct 2004.
  23. Hennessey, S., Bexten, K., Sun, C., and Tardos, M.,“Platte River East Sets Precast Record in Nebraska ,” PCI Convention, Atlanta, Oct. 2004.
  24. Tadros, Lafferty, “End Zone Crack Control,” PCI Convention, Atlanta, Oct. 2004.
  25. Tadros, Bowers, “WWR fatigue” PCI Convention, Atlanta, Oct. 2004.
  26. Badie, Tadros, “Precast decks,” PCI Convention, Atlanta, Oct. 2004.
  27. Sun,  C., Tadros M., Lafferty M.,  and Fallaha S., “High Performance Precast Concrete Bridge Deck System for the Skyline Bridge”, Proceedings of the 2004 National Concrete Bridge Conference, Charlotte, NC, Portland Cement Association, Skokie, IL, May 2004.
  28. Jongpitakseel, N., Bowers, J., Amorn., W., and  Tardos M., “Fatigue of Welded Wire Reinforcement”, Proceedings of the 2004 National Concrete Bridge Conference, Charlotte, NC, Portland Cement Association, Skokie, IL, May 2004.
  29. Sun C., Girgis A., Tadros M. and Badie S., “Structural Behavior of Flexural Members with High Performance Concrete”, Proceedings of 3rd International Symposium on High Performance Concrete and PCI National Bridge Conference, PCI, Chicago, IL, October 2003.
  30. Tadros M., “Trends in Bridge Construction in the United States of America”, Proceedings of the 9th ASEC, Abu Dhabi, UAE, Vol. 1, November 2003, pp. 25.
  31. Tadros M., and Badie S., ”Efficient Deck/Girder Connections for Rapid Deck Replacement”, Proceedings of the 9th ASEC, Abu Dhabi, UAE, Vol. 1, November 2003, pp. 495-502.
  32. Tadros M., Kusolthamarat D., Holmes W. and Foster T. ”Precast Concrete  Residential Building Envelop”, Proceedings of the 9th ASEC, Abu Dhabi, UAE, Vol. 1, November 2003, pp. 647-656.
  33. Sun C., Tadros M., and Hennessey S., “Innovative Bridge Continuity System Making Precast Concrete Girders Continuous for Deck Weight”, Proceedings of the 9th ASEC, Abu Dhabi, UAE, Vol. 2, November 2003, pp. 1261-1268.
  34. Sun C., Tadros M., and Fallaha S., “Full-depth Precast/Prestressed Concrete Bridge Deck Panel System”, Proceedings of the 9th ASEC, Abu Dhabi, UAE Vol. 2, November 2003, pp. 1269-1276.
  35. Destefano R., Evans J., Sun C. and Tadros M., “Flexural Crack Control in Concrete Bridge Structures”, Proceedings of 3rd International Symposium on High Performance Concrete and PCI National Bridge Conference, October 2003.
  36. Hennessey S., Sharp D., Sun C. and Tadros M., “Construction and Monitoring of Clarks Viaduct in Nebraska”, Proceedings of 3rd International Symposium on High Performance Concrete and PCI National Bridge Conference, PCI, Chicago, IL, October 2003.
  37. Tardos, M., Holmes, W., Ksoul, D., Kakish, H., and Thielen, P.,“Construction of NU-House- An Innovative Precast Concrete Residential Framing System”, Proceedings of 3rd International Symposium on High Performance Concrete and PCI National Bridge Conference, PCI, Chicago, IL, October 2003.
  38. Hennessey S., Bexten K., Sun C. and Tadros M., “Value Engineering of Clarks Viaduct in Nebraska”, Proceedings of 2nd International Symposium on High Performance Concrete and PCI National Bridge Conference, Chicago, IL, October 2002.
  39. Tadros, M.K., “Unified Design Method,” Annual Structural Conference, Omaha, Oct. 2002.
  40. Tadros, M.K., “Welded Wire Reinforcement Research in Nebraska,” Wire Reinforcement Institute Annual Meeting, Amelia Island, Florida, Oct. 2002.
  41. Tadros, M.K., Al-Omaishi, N., Seguirant, S, and Gallt, J., “Prestress Loss in High Strength Pretensioned Concrete Girders,” PCI Annual Convention, Nashville, Tennessee, Oct. 2002.
  42. Tadros, M.K., Jong, N. and Yehia, S., “Simplified Shear,” PCI Annual Convention, Nashville, Tennessee, Oct. 2002.
  43. Tadros, M.K., Noppakunwijai, P., and Yehia, S., “Allowable Compression,” Nebraska Department of Roads, October 2002.
  44. Jongpitakseel, N., D., Yehia, S., and  Tadros, M.K.,“ Simplified Shear Design Using AASHTO LRFD Modified Compression Field Theory ,” PCI Annual Convention, Nashville, Tennessee, Oct. 2002.
  45. Kosul, D., Yehia, S., and  Tadros, M.K.,“ Precast/ Prestressed Concrete Residential Floor Systems,” PCI Annual Convention, Nashville, Tennessee, Oct. 2002.
  46. Hennessey, S., Tadros, M.K., Sun, C., “Value Engineering of Clarks Bridge,” PCI Annual Convention, Nashville, Tennessee, Oct. 2002.
  47. Tadros, M.K., Noppakunwijai, P., and Yehia, S., “Allowable Compression,” Nebraska Department of Roads, October 2002.
  48. Tadros, M.K., Al-Omaishi, N., Seguirant, S, and Gallt, J., “Prestress Loss in High Strength Pretensioned Concrete Girders,” August 2002.
  49. Sun C., Badie S., and Tadros M. K., “New Details for Precast Concrete Girders made Continuous for Deck Weight,” Proceedings of the Transportation Research Board 81st Annual Meeting, January 2002.
  50. Tadros, M.K., and Badie, S., “Continuity in Precast Girders,” Transportation Research Board, Annual Meeting, Washington, D.C., January 2002.
  51. Gilliland, S, Tadros, M.K., “Value Engineering of the Arbor Rail Bridge,” PCI Convention, Reno, Nevada, Oct. 2001.
  52. Tadros, M.K., “Spliced Girder Bridge Design,”   PCI Convention, Reno, Nevada, Oct. 2001.
  53. Tadros, M.K., Noppakunwijai, P., and Ma, Z., “Shear Limits,” Nebraska Department of Roads, July 2001.
  54. Four Presentations at NDOR on shear, allowable compression, end zone and spliced girders, July 2001.
  55. Tadros, M.K, “Re-evaluation of LRFD Specifications on Spliced Girder Bridges,” PCI Committee Days, April 2001.
  56. Tadros, M.K., “Clover Bar Bridge, NU2800 Record Span,” PCI Committee Days, April 2001.
  57. Tadros, M.K., “Continuity for Deck Weight Using Non-Prestressed Threaded Rods,” PCI Committee Days, April 2001.
  58. Tadros, M.K., “A Haunch Soffit Systems for NU Standard Spliced Girder Segments,” PCI Committee Days, April 2001.
  59. Tadros, M.K., “Justification for Removal of All Compression Limits in Prestressed Concrete Design,” PCI Committee Days, April 2001.
  60. Tadros, M.K, “Precast Seismic Innovations Aid Design in All Zones,” Ascent, PCI, winter, 2000, pp.51-58.
  61. Tadros, M.K., “Strength Based Design for Prestress Release, Structural Engineering in the 21st Century, Omaha, NE., September 29, 2000.
  62. Noppakunwijai, P., Tadros, M. K., Ma, Z. "Strength Design of Pretensioned Flexural Members for Prestress Transfer," Proceedings of PCI/FHWA/FIB International Symposium on High Performance Concrete, September 25 – 27, 2000, Orlando, Florida, pp. 585 - 597. (Presented by M. K. Tadros).
  63. Ma, Z. and Tadros, M. K. “Shear of High Performance Prestressed Concrete Stemmed Members,” Proceedings of the International Bridge Engineering Conference, Sharm El Sheikh, Sinai, Egypt, March 26 – 30, 2000.
  64. Tadros, M. K. and Badie, S. S. “New Development of Precast Bridge Deck Systems in USA,” Bridge Engineering Conference 2000, March 26-30, 2000, Sharm El-Shiekh, Sinai, Egypt.
  65. Tadros, M.K., Badie, S.S.; Baishya, M.C., and Yamane, T. “Innovative Prestressed Concrete Bridge Deck Panel Systems,” Proceeding of the TRB 79th Annual Meeting, Washington, DC, Jan. 9-13, 2000.
  66. Tadros, Maher K., Badie, Sameh S., Baishya Mantu, and Yamani, Takashi “Innovative Prestressed Concrete Bridge deck Panel Systems,” 78th Annual Meeting, Transportation Research Board (TRB), Washington D.C., January 9-14, 2000.
  67. Seng, J, Devalapura, R.K., and Johnson, B.D., “Development and Testing of Low-Conductivity Tie for Concrete Sandwich Panels,” Proceedings of the ASCE Materials Congress, Cincinnati, Ohio, 1999, pp. 1-8.
  68. Tadros, Maher K., and Badie Sameh, “High Performance Precast Concrete Bridge Deck Systems,” ASCE Structural Engineering Annual Conference, Iowa State University, Nov.1, 1999.
  69. Tadros, Maher K., Badie Sameh, and Ma, John, “Shear in Bridge Girders,” PCI Committee Days, Chicago, IL, April 14, 1999.
  70. Tadros, Maher K., Badie Sameh, and Ma, John, “Superstructure/Substructure Details,” PCI Committee Days, Chicago, IL, April 14, 1999.
  71. Tadros, Maher K., Ma, John, Huo, Sharon, and Baishya, Mantu, “Structural Design of HPC Bridges,” Annual Convention, American Concrete Institute, Chicago, Illinois, March 1999.
  72. Tadros, Maher K., “Simplified Superstructure/Substructure Bridge Bearing Details for Integral Bridges,” presented at the 78th Annual Meeting of the Transportation Research Board, Committee A2C01-General Structures, Washington, D.C., and January 1999.
  73. Tadros, Maher K. and Beacham Mike, “The Nebraska University Inverted Tee System,” Presented at the Nebraska Association of County Officials, 104th Annual NACO Convention, Omaha, Nebraska, Dec.1-3, 1998.
  74. Jamshidi, Mostafa, Gilliland, Scott K., Tadros, Maher K., “Recent Experience with Spliced NU I-Girder Bridges,” presented at the Annual Convention of the Precast/Prestressed Concrete Institute, Atlanta, Georgia, and October 1998.
  75. Tadros, Maher K., a one day seminar of the PCI Bridge Design Manual, co-taught with Keith Kaufman, Senior Design Engineer, CH2MHILL, seminar held in Topeka, Kansas, October 8, 1998
  76. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “NUDECK- A New Prestressed Stay-In-Place Concrete Panel for Bridge Decks”, Proceeding of the CROSSROADS2000 Conference, Iowa State University, August 19-20, 1998.
  77. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “NUDECK- A New Prestressed Stay-In-Place Concrete Panel for Bridge Decks”, Proceeding of the CROSSROADS2000 Conference, Iowa State University, August 19-20, 1998, 20 pp.
  78. Devalapura, R.K., Greenwood, M.E., Gauchel, J.V., and Humphrey, T., “Evaluation of GFRP Performance Using Accelerated Test Methods,” Proceedings of the First International Conference on Durability of Composites for Construction, Sherbrooke, Canada, August 1998.
  79. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “NUDECK- A New Prestressed Stay-In-Place Concrete Panel for Bridge Decks”, Proceeding of the 5th International Conference On Short and Medium Span Bridge, CSCE, Calgary, Alberta, Canada, July 13-17, 1998.
  80. Badie, S.S.; Kamel, M.R, and Tadros, M.K. “An Efficient Box Beam for Short Span Bridges”, Proceeding of the 5th International Conference On Short and Medium Span Bridge, CSCE, Calgary, Alberta, Canada, July 13-17, 1998
  81. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “An Innovative Stay-in-Place Precast Prestressed Sub-Panel for Bridge Decks”, XIII FIP Congress and Exhibition, Amsterdam, the Netherlands, May 23-29, 1998, pp. 187-190.
  82. Yamane, T.; Badie, S.S.; Baishya, M.C., and Tadros, M.K. “Full-Depth Two Way Precast prestressed Concrete Bridge Deck System”, XIII FIP Congress and Exhibition, Amsterdam, The Netherlands, May 23-29, 1998, pp.325-326.
  83. Ma, Z., Saleh, M., and Tadros, M. K. “Optimized Anchorage Zone Details for I-girder Bridges,” Proceedings of the XIII FIP Congress, Vol. 1, pp. 465 – 466, Amsterdam, May 23-29, 1998.
  84. Ma, Z., Tadros, M. K., and Baishya, M. “Shear Behavior of High-Performance Prestressed Concrete Composite I-girders,” Proceedings of the XIII FIP Congress, Vol. 2, pp. 943 – 946, Amsterdam, May 23-29, 1998.  (Presented by Maher K. Tadros).
  85. Tadros, Maher K., a one day seminar of the PCI Bridge Design Manual, co-taught with Keith Kaufman, Senior Design Engineer, CH2MHILL, seminar held in Lincoln, Nebraska, May 8, 1998.
  86. Tadros, M. K. and Ma, Z.  “Simplified LRFD Shear Design,” Presented at the PCI Bridges Committee during 1998 PCI Committee Days, Chicago, and May 3, 1998.
  87. Tadros, M. K. and Ma, Z.  “Time Dependent Analysis of Continuous Precast Concrete Composite Girders,” Presented at the PCI Bridges Committee during 1998 PCI Committee Days, Chicago, and May 2, 1998.
  88. Tadros, Maher K., Recent Developments in Bridge Engineering, Nebraska Section, American Society of Civil Engineers, Mahoney Park, April 1998.
  89. Tadros, M.K., Baishya, M.C., Ma, Z., and Badie, S.S. “Structural Performance of High-Strength Prestressed Concrete Bridge Beams”, ACI International Spring Convention, Structural Design, Houston, Texas, March 22-27, 1998.
  90. Tadros, M. K., Baishya, M., Ma, Z., and Badie, S. “Structural Performance of High-Strength Prestressed Concrete Bridge Beams,” ACI Symposium: High Performance Concrete: A Look Back, A Look Ahead, A Tribute to Paul Zia, March 1998.  (Presented by Maher K. Tadros).
  91. Tadros, Maher K., “PCI Bridge Design Manual, an Introduction” presented at the 43rd Annual Structural Engineering Conference, The University of Kansas, Lawrence, Kansas, March 1998.
  92. Tadros, Maher K., “HPC Design Parameters,” Presented at the Colorado High Performance Concrete Bridge Showcase, U.S. dept. of transportation, federal highway administration, University of Colorado, Denver, Colorado, February 18-20, 1998.
  93. Rapid Replacement of Concrete Bridge Decks, 47th Annual Concrete Conference, University of Minnesota, December 18, 1997.
  94. PCI Bridge Design Manual Seminar, Salem, Oregon, Nov. 1997.
  95. Tadros, Maher K., Badie, Sameh and Baishya, Mantu,” Improved Precast Prestressed Concrete Stay-in-Place Deck Panels,” PCI, Annual Convention, Oct. 20, 1997, New Orleans, LA
  96. PCI’s Educational Investments, The Concrete Producer, Aberdeen Group, October 1997, pp. 719-720, an article written by Don Merwin about my research and my student, Lynn Geren.  Lynn Geren was featured on the cover of this magazine with NU I-girder in the background.
  97. PCI’s Precast Bridge Design Manual Breaks New Ground, the Concrete Producer, Oct. 1997, pp. 722-724. Article written by Mary Hurd about a book principally authored by Tadros.
  98. Ma, Z., Tadros, M. K., and Baishya, M. “Shear Limit of HPC Bridge I-Girders,” Proceedings of the PCI/FHWA International Symposium on High Performance Concrete, pp. 431-442, New Orleans, Louisiana, October 20-22, 1997.  (Presented by Zhongguo (John) Ma).
  99. Devalapura, R.K., Gauchel, J.V., Greenwood, M.E., Hankin, A., and Humphrey, T., “Long-Term Durability of Glass-Reinforced Polymer Composites in Alkaline Environments,” Proceedings of the Third International Symposium on Non-Metalic (FRP) Reinforcement for Concrete Structures, Sapporo, Japan, October 1997, pp. 83-90.
  100. Impact of HPC on Structural Design, SHRP High Performance Concrete Bridge Showcase, New Hampshire DOT/FHWA, Waterville Valley, New Hampshire, Sept. 22-23, 1997.
  101. Badie, S.S.; Baishya, M.C, and Tadros, M.K. “Innovative Continuous Prestressed Concrete Bridge Deck Sub-Panel”, The Mouchel Conference on Innovation in Civil and Structural Engineering, Cambridge, England, August 19th-21st, 1997.
  102. Kamel, M.R.; Badie, S.S., and Tadros, M.K. “Precast Pretensioned Trapezoidal Box Girder”, International Conference, New Technologies in Structural Engineering, Lisbon, Portugal, July 1997.
  103. Ma, Z., Tadros, M. K., and Baishya, M. “Shear Strength of HPC I-Girders,” Proceedings of the Engineering Foundation Conference, Kona, Hawaii, July 1997.  (Presented by Maher K. Tadros).
  104. Ma, Z., Yehia, S., Cook, R., and Baishya, M. “Knowledge based expert system for bridge deck repair,” Proceedings of the International Conference on New Technologies in Structural Engineering, Vol. 2, pp. 1015 – 1020, IABSE and FIP, Lisbon, Portugal, July 2-5, 1997.  (Presented by Zhongguo (John) Ma).
  105. Ma, Z. and Tadros, M. K. “Shear Strength of HPC I-girder with WWF Shear Reinforcement: Part I,” Proceedings of the International Conference on New Technologies in Structural Engineering, Vol. 1, pp. 111 – 118, IABSE and FIP, Lisbon, Portugal, July 2-5, 1997.  (Presented by Zhongguo (John) Ma).
  106. Ma, Z. and Tadros, M. K. “Prestressed Concrete Box Girders Made From Unsymmetrical Precast Z-Sections,” Proceedings of the International Conference on New Technologies in Structural Engineering, Vol. 1, pp. 657 – 664, IABSE and FIP, Lisbon, Portugal, July 2-5, 1997.
  107. HPC in Nebraska, SHRP High Performance Concrete Bridge Showcase, Federal Highway Administration, Richmond, Virginia, June 24-26, 1997.
  108. NU: NCHRP 12-41, Rapid Replacement of Bridge Decks, 87th Annual Conference, Highway Engineers’ Association of Missouri, Osage Beach, Missouri, May 28-29, 1997.
  109. Transverse Design of Adjacent Precast Concrete Box Girder Bridges, Transportation Research Board, 76th Annual Meeting, Session 183, Washington, D.C., Jan. 1997.
  110. Bridge Deck Replacement, Transportation Research Board, 76th Annual Meeting, Committee A2C01, General Structures, Washington, D.C., Jan. 1997.
  111. “A Precast Concrete Bridge System for Rural Nebraska,” Nebraska Technology Transfer Center Interchange, winter, 1996.
  112. “Structural Design,” PCI Convention, Orlando, Florida, October 23, 1996.
  113. “A Report by the Authors,” PCI Convention, Orlando, Florida, October 21, 1996.
  114. “Recent Developments in Prestressed Concrete Bridge Research”, Bridge Design Workshop #4, Manhattan, Kansas, October 4, 1996.
  115. “New Developments in Bridge Design,” Sixteenth Annual Structural Conference, September 27, 1996.
  116. “Supercrete Secret to Giles Bridge,” July 4, 1996, Papillion Times, Vol. 120, No. 20.
  117. “Wilson Concrete in LaPlatte is Hotbed for Stress Testing,” Omaha World-Herald, June 27, 1996.
  118. “Nebraska Develops Precast Concrete Inverted T Bridge System for Short-to-Medium Span Use,” Oklahoma Local Government News, summer 1996.
  119. “New Bridge Manual under Construction,” PCI Journal, ASCENT, spring 1996, pp 24-26.
  120. Discussion of the LRFD provisions related to precast concrete deck panels with proposal for Deletion or revision of Article 9.7.4.3.1(I) and Article 9.7.5.1, presented to the T-10 AASHTO Technical Committee for Concrete Design, Philadelphia, Pennsylvania, May 13, 1996.
  121. Krause, G.L., Devalapura, R.K., and Tadros, M.K., "Testing of Prestressed Clay-Brick Walls," Proceedings of the American Society of Civil Engineers (ASCE) Structures Congress XIV, Chicago, Illinois, April 1996.
  122. “High Performance Concrete for Giles Road Bridge,” ASCE Structures Congress, Chicago, Illinois, April 1996.
  123. “Bridge Projects in Other States,” SHRP High Performance Concrete Bridge Showcase, Houston, Texas, March 25-27, 1996.
  124. “Officials Tout Hybrid Joist Made at UNO,” Omaha World-Herald, March 13, 1996.
  125. “NCHRP 12-41 - Rapid Bridge Deck Replacement,” presented to the TRB Committee A2C01, General Structures, January 10, 1996.
  126. Einea, A., Saleh, Mohsen, Huo, X. Tadros, Maher, K., “High Performance Concrete Bridge in Sarpy County, Nebraska,” PCI Annual Convention, Reno, Nevada, October 15-18, 1995.
  127. Saleh, Mohsen, Einea, A., Tadros, Maher K., “New Methods for Creating Continuity in Precast Concrete Girder Bridges,” Proceedings, The Nebraska Academy of Sciences, 115th annual meeting, 1995.
  128. “Full-Depth Prestressed Concrete Bridge Deck Panel System” and “Precast Concrete Bridge Deck Panels, Session 103, sponsored by TRB Committee A2C03, Concrete Bridges, July 25, 1995.
  129. "High Performance Lightweight Concrete Masonry Units," 5-volume report and Executive Summary submitted to U.S. Army Corps of Engineers-Construction Engineering Research Laboratory, December 1994.
  130. "Reinforced Concrete Box Culvert Design," preliminary report submitted to Nebraska Department of Roads, November 1994.
  131. "Reinforced Concrete Box Culvert Design-User's Manual," preliminary report submitted to Nebraska Department of Roads, November 1994.
  132. Khalifa, Magdi and Maher Tadros, "The World's Largest Cable Stayed Foot Bridge Using Fiber Reinforced Plastic," presented to the ASCE 1994 Materials Engineering Conference, San Diego, California, and November 14, 1994.
  133. "Rapid Replacement of Bridge Decks," draft interim report submitted to National Cooperative Highway Research Program, October 1994.
  134. Einea, A., Tadros, M.K., Schultz, A.E. and R. Magana, "Seismic Behavior of a Six-Story Office Building," presented at the PCI/PRESSS Workshop, Chicago, Illinois, and October 13-14, 1994.
  135. Einea, Amin and M.K. Tadros, "An Innovative Technique for Achieving Continuity in Precast Prestressed Girder Bridges," presented to the 4th International Conference on Short to Medium Span Bridges, Halifax, Nova Scotia, Canada, and August 8-11, 1994.
  136. Devalapura, R.K., Krause, G.L., and Tadros, M.K., "Experimental Investigation on the Flexural Behavior of Prestressed Masonry," Proceedings of the 10th International Brick/Block Masonry Conference, Vol. 2, Calgary, Canada, July 1994, pp. 609-618.
  137. Devalapura, R.K., Kamel, M.K., and Arumugasaamy, P., "Nondestructive Techniques for Corrosion Evaluation of Steel in Concrete," Proceedings of the International Conference on Corrosion and Corrosion Protection of Steel in Concrete, University of Sheffield, United Kingdom, July 1994.
  138. Priestley, M.J. Nigel, Tadros, Maher K. and Catherine W. French, "PRESSS: Progress through Year Four - Phase II," presented to the XII FIP Congress, Washington, D.C., May 31, 1994.
  139. Tadros, Maher K., Magana, Rafael, Schultz, Arturo, Low, Say-Gunn and Amin Einea, "Seismic Behavior of An All-Precast, Six-Story Office Building," presented to the XII FIP Congress, Washington, D.C., May 31, 1994.
  140. Schultz, A.E., Tadros, Maher K., Low, Say-Gunn and Rafael A. Magana, "Seismic Resistance of Joints in Precast Shear Wall Panels," presented to the XII FIP Congress, Washington, D.C., and May 31, 1994.
  141. Savage, John, Arumugasaamy, Panchy, and Maher Tadros, "Precast Prestressed Concrete Double Tees with Web Openings," presented to the Nebraska Academy of Sciences 104th Annual Meeting, Lincoln, NE, and April 22, 1994.
  142. Arumugasaamy, P., Kamel, M. and M.K. Tadros, "New Shallow Precast Prestressed Concrete Systems for Short Span Bridges," presented to the Nebraska Academy of Sciences 104th Annual Meeting, Lincoln, NE, April 22, 1994.
  143. Kamel, M., Benak, J.V. and M.K. Tadros, "Precast Prestressed Concrete Piles in Integral Abutment Bridges," presented to the Nebraska Academy of Sciences 104th Annual Meeting, Lincoln, NE, April 22, 1994.
  144. Tadros, M.K. and Staab, E., "High-Performance Ultra Light Concrete Masonry Unit," presented to the American Concrete Institute-Nebraska Chapter/Nebraska Masonry Institute, Lincoln, Nebraska, April 12, 1994.
  145. Tadros, M.K., Schultz, A.E. and Magana, R., "Behavior of a Six-Story Office Building under Moderate Seismicity," presented at the U.S. PRESSS Coordination Meeting, San Rafael, California, March 19-20, 1994.
  146. Tadros, M.K. and Einea, Amin, "Swaged Strandsplicer System, Static Load Testing," submitted to Barsplice Products, Inc., Dayton, OH, February 1994.
  147. Tadros, M.K. and Einea, Amin, "Splicing of Pretensioned Strands," final report submitted to Barsplice Products, Inc., Dayton, OH, January 1994.
  148. Geren, K.L. and Tadros, M.K., "Optimization of Precast/Prestressed Concrete Bridge I-Girders," presented at the FIP Symposium '93, Kyoto, Japan, October 19, 1993.
  149. Tadros, M.K., Einea, A., Low, S-G, Magana, R. and Schultz, A., "Seismic Resistance of a Six-Story Totally Precast Office Building," presented at the FIP Symposium '93, Kyoto, Japan, October 18, 1993.
  150. Kneip, Steve and Tadros, Maher K., "Splicing the Strands on the 10th Street Pedestrian Overpass," presented at the PCI 1993 Convention and Exhibition, San Diego, California, October 13, 1993.
  151. Tadros, M.K., "Optimization of Precast Bridge I-Girder Shapes," presented at the PCI 1993 Convention and Exhibition, San Diego, California, October 11, 1993.
  152. Priestley, M.J. Nigel, Tadros, Maher K. and French, Catherine W., "PRESSS: Progress Through Year Three - Phase II," presented at the PCI 1993 Convention and Exhibition, San Diego, California, October 11, 1993.
  153. Tadros, M.K. and Geren, K.L., "The Next Generation of Precast Concrete I-Girder Shapes", presented at the 10th Annual International Bridge Conference and Exhibition, Pittsburgh, Pennsylvania, June 15, 1993.
  154. Ficenec, J.A., Kneip, S.D., Tadros, M.K. and Einea, A., "A New Continuous Precast Concrete Bridge System", presented at the 10th Annual International Bridge Conference and Exhibition, Pittsburgh, Pennsylvania, June 15, 1993.
  155. Low, S.G., Tadros, M.K., Einea, A., Khalifa, M.A., Magzoub, A.E. and Staab, E., "Shape Optimization of Concrete Masonry Units," presented at the Sixth North American Masonry Conference, Philadelphia, Pennsylvania, June 6-9, 1993.
  156. Bowser, J., Kulkarni, S., Tadros, M.K., Krause, G. and S. Sweeney, "Water Penetration and Absorption of High Performance Lightweight Concrete Masonry Units," presented at the Sixth North American Masonry Conference, Philadelphia, Pennsylvania, June 6-9, 1993.
  157. Amiri, Babrak, Krause, Gary L., Tadros, Maher K. and Geary Combs, "Mix Design of Lightweight High-Performance Masonry Block," presented at the Sixth North American Masonry Conference, Philadelphia, Pennsylvania, June 6-9, 1993.
  158. Tadros, Maher K., "Concrete Lite", presented at the 1993 Annual Meeting of the Nebraska Society of Professional Engineers, Lincoln, Nebraska, May 21, 1993.
  159. Tadros, Maher K., "Special Applications", presented at the Illinois Department of Transportation/Precast‑Prestressed Producers of Illinois Design Seminar for Bulb‑Tees, Springfield, Illinois, November 12, 1992.
  160. Tadros, Maher K. and Spaans, Leo, "Long Span I Beam Applications", presented at the Indiana Department of Transportation Seminar on Precast/Prestressed Concrete, Indianapolis, Indiana, October 21, 1992.
  161. Priestly, M.J. Nigel, Tadros, Maher K., and French, Catherine W., "PRESSS: Progress Through Year Two", presented at the PCI 1992 Convention and Exhibition, Nashville, Tennessee, October 12, 1992.
  162. Tadros, Maher K., "Folded Plate Culvert System," presented at the Showcase of Innovative Construction Methods and Technologies for Roads and Bridges, Kansas City, Missouri, June 10‑12, 1992.
  163. Tadros, Maher K., "Splicing Precast I‑Girders," presented at the Showcase of Innovative Construction Methods and Technologies for Roads and Bridges, Kansas City, Missouri, June 10‑12, 1992.
  164. Devalapura, R.K., and Tadros, M.K., "Innovative Retaining Wall Systems," Proceedings of the Nebraska Academy of Sciences, Nebraska Wesleyan University, Lincoln, NE, April 1992.
  165. Abdel‑Karim, Ahmad, M. and Tadros, M.K., "Splicing Increases Span Capabilities of Precast Bridge I‑Girders," presented at the National Concrete Engineering Conference, Chicago, Illinois, April 1992.
  166. Abdel‑Karim, A.M. and Tadros M.K., "PC Based Serviceability Analysis of Spliced‑Girder Bridges,” presented at the ASCE 10th Structures Congress, San Antonio, Texas, April 13‑15, 1992.
  167. Abdel‑Karim, A.M. and Tadros M.K., "Splicing Increases Span Capabilities of Precast Bridge I‑Girders," presented at the National Concrete Engineering Conference, Chicago, Illinois, March 30‑April 1, 1992.
  168. Fogarasi, Gyula and Tadros, Maher K., "Automation of Precast Concrete Production Worldwide," presented at the 1991 PCI Convention and Exhibition, Minneapolis, Minnesota, October 13‑16, 1991.
  169. Tadros, M.K., "Emerging Needs of Rural Infrastructure," Western Planners' Conference, Lincoln, Nebraska, August 1991.
  170. Geren, K. Lynn and Tadros, Maher K., "The Next Generation of AASHTO‑I and Bulb Tee Bridge Girders," presented at the 1991 PCI Convention and Exhibition, Minneapolis, Minnesota, October 13‑16, 1991.
  171. Devalapura, R.K., and Tadros, Maher K., “Modeling of Stress-Strain Behavior of Prestressing Tendons, ”Proceedings of the International Symposium on Modern Applications of Prestressed Concrete, Vol. 2, Beijing, China, September 1991, pp. 328-335.
  172. Low, S.G. and Tadros, M.K., "Seismic Resistant Precast Concrete Office Framing," International Symposium on Modern Applications of Prestressed Concrete, Beijing, China, September 1991.
  173. Devalapura, R. and Tadros, M.K., "Modeling of Stress‑Strain Behavior of Prestressing Tendons," International Symposium on Modern Applications of Prestressed Concrete, Beijing, China, September 1991.
  174. Tadros, M.K., Fogarasi, G., Culp, T., and Einea, A., "American and European Experience with Sandwich Panels," International Symposium on Modern Applications of Prestressed Concrete, Beijing, China, September 1991.
  175. Abdel Karim, A. and Tadros, M., "Serviceability Analysis of Spliced Girder Bridges Using PC's," presented at the 2nd NSF Workshop on Bridge Engineering Research in Progress, October 1990, Reno, Nevada.
  176. Tadros, M.K., Einea, A., and Abdel Karim, A., “A New Precast Concrete System for Short Span Bridges and Culverts," October 1990, Reno, Nevada.
  177. Low, S.G., Tadros, M.K., and Nijhawan, J.C., "New Ideas in Multistory Office Framing,” presented at the Precast/Prestressed Concrete Institute Annual Convention, Las Vegas, Nevada, October 1990.
  178. Abdel Karim, A. and Tadros, M.K., "Spliced Girder Bridges: A State‑of‑the‑Art," presented at the Precast/Prestressed Concrete Institute Annual Convention, Las Vegas, Nevada, October 1990.
  179. Tadros, M.K., "PCI Funded Research Projects at the University of Nebraska," presented at the PCI Zone 3 Meeting in Omaha, Nebraska, April 1990.
  180. Tadros, Maher K. and Joseph V. Benak, "Load Distribution of Concrete Box Culverts," final report to the Nebraska Department of Roads, November 1990, 224 pp.
  181. Tadros, Maher K. and Benak, Joseph V., "Bridge Abutment and Approach Slab Settlement," final report to the Nebraska Department of Roads, December 1989.
  182. "High Strength Bolted Connections," presented at the U.S. Army Corps of Engineers, Missouri River Division, Omaha District and Kansas City District, July 1989, 32 pp.
  183. "Serviceability of Segmentally Constructed Composite Bridges, presented at the American Concrete Institute Annual Convention, Atlanta, Georgia, February 1989, 18 pp. (jointly with Joo, Yun‑Sool).
  184. "Field Instrumentation and Testing of a Reinforced Concrete Box Culvert," presented at the National Science Foundation Symposium on Bridge Research in Progress, Iowa State University, Des Moines, Iowa, September 1988 (jointly with Benak, Abdel‑Karim, Meyer, and Bexten).
  185. "Precast Storage Tanks, A Successful New System," Presented at the Prestressed Concrete Institute Committee Days, Chicago, Illinois, April 1988.
  186. "Microcomputer Analysis of Partially Prestressed Concrete," Presented at the Second International Conference on Computer Applications in Concrete, March 1988.
  187. "Current Practice of Reinforced Concrete Box Culvert Design," Presented at the Transportation Research Board Annual Meeting, Washington, D.C., January 1988.
  188. "Effects of Support Settlement in Concrete Members," American Concrete Institute Fall Convention, Seattle, Washington, November 1987 (jointly with Joo).
  189. Tadros, M.K., "Cost‑Effective Concrete Box Culvert Design," Research Report No. NE‑DOR‑R 86‑3, Sponsored by the Nebraska Department of Roads and the Federal Highway Administration, Lincoln, Nebraska, August 1986, 224 pp.
  190. "Design of Formblock Walls," a report written by Tadros, Gilliland, and Hymans for the NCMA, presented to various professional groups in Omaha, Nebraska (a total of four presentations were made in 1984 and 1985).
  191. "Structural Tolerance of Concrete Bridges to Support Settlement," American Society of Civil Engineers, Fall Convention, San Francisco, California, October 1984, 17 pp. (jointly with Moulton).
  192. "The 1983 Revisions of the ACI 318 Code," American Concrete Institute Seminar, Omaha, Nebraska, October 1984 (jointly with Ghosh, King and Salmon).
  193. "Moment Resisting Beam‑Column Connections," Prestressed Concrete Institute Annual Convention, Las Vegas, Nevada, 1983 (jointly with Potter, Nijhawan and Schneider).
  194. "Microcomputers and the Future of Structural Engineering Education and Practice," Biannual Conference on Technology for Development, Cairo, Egypt, December 1982 (jointly with Holmes).
  195. "A Successful, New Type of Concrete Storage Tank," Annual Convention, Prestressed Concrete Institute, November 1982.
  196. "Modern Water Storage and Distribution Systems," Conference on International Agribusiness, Omaha, Nebraska, October 1982 (jointly with Bauer and Rehak).
  197. "Microteaching through Interactive Television," UNO, UN‑L, March 17, 1982.
  198. "The State‑of‑the‑Art of Precast‑Prestressed Concrete Tanks," presented to Tank Committee at the PCI Annual Convention, Los Angeles, California, October 1981.
  199. "Design of Post‑Tensioned Slabs," Annual Structural Conference, Omaha, Nebraska, September 1981.
  200. "Deflection of Partially Prestressed Members," presented to Committee 435, ACI, Dallas, Texas, February 1981.
  201. "Computer Program for Analysis of Stresses and Deformations in Segmental Construction ‑ A Users Manual," Research Report, Department of Civil Engineering, University of Nebraska, 1980 (jointly with Ghali and Dilger).
  202. Tadros, M.K., "Designing for Deflection," Presented at Prestressed Concrete Institute Annual Convention, October 1979.
  203. "Lessons from Earthquakes," West Virginia University, October 1978.
  204. "Short Span Bridges, Design and Maintenance," West Virginia University, May 1977.
 
         
spacer

Copyright ©2006 University of Nebraska-Lincoln
Last modified: Monday, August 25, 2008, 10:05:47 AM CDT
The University of Nebraska is an affirmative action/equal opportunity institution.

 University of Nebraska - Nebraska's Four Campus University.